Anthem MRX Remote

An app that contains the remote control function of Anthem MRX 710, MRX 510, and MRX 310 audio video receivers. Similar in functionality to that of the factory remote control, the MRX app functions through the local network which allows operation of the remote control from a different room. Commands relating to one another are grouped on separate pages. To change page, swipe the screen sideways.
Important notes:
1. Software v1.2.1 or later must be installed in the MRX receiver.
2. Ethernet connection to the rear panel of the MRX receiver is required, and the control device must be on the same local network.
3. The first time that the app is used, the MRX must be powered on beforehand so the app can apply necessary settings.
4. The app can control one MRX per network.
5. MRX can be controlled by one device at a time – if two or more are running the app at the same time, MRX responds to the one with the more recent connection.
6. This app is not recommended if a custom IP or RS-232 control system is or will be controlling the MRX - it is normally best to use one type of network control to prevent conflicts.