Jet setting not suitable for UK Minimax
Jet settings are not correct for new UK regulations with throttle restrictor for Minimax 950 (Intermax) Please can you update the App to include this?
Jetting Rotax Max EVO Kart
for Micro Mini Junior Max DD2
#1 Keyword Rankings
Today
Top 10 Rankings
Today
Top 30 Rankings
Today
Top 100 Rankings
Today
Description
This app provides, using temperature, altitude, humidity, atmospheric pressure and your engine configuration, a recommendation about jetting and spark plug to use for karts with Rotax 125 Max EVO (Micro Max Evo, Mini Max Evo, Junior Max Evo, Senior Max Evo, Max DD2 Evo) engines, which use a Dellorto VHSB 34 XS carb
This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet. Internal barometer is used on supported devices for better precision. Application can run without GPS, WiFi and internet
• For Mini, Junior, Max, DD2 you can choose which cylinder you are using. At the Grand Finals 2016, the cylinders for the Mini and Junior classes were updated. At the Grand Finals 2017, the cylinders for classes Max and DD2 were updated. New cylinders require richer carburation
• Two different tuning modes: "By regulations" and "Freestyle"!
• In first mode, the following values are given: main jet, spark plug, spark plug gap, needle type and position (including intermediate positions with washer), air screw position, idle screw position, optimal water temp, gear oil recommendation
• In second mode (Freestyle), the following values are given: main jet, spark plug, emulsion tube, needle, needle type and position (including intermediate positions with washer), throttle valve, idle jet (outer pilot jet), idle emulsifier (inner pilot jet), air screw position
• Fine tuning for all these values
• History of all your carburetor setups
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Selectable fuel type (VP MS93, gasoline with or without ethanol)
• Adjustable fuel/oil ratio
• Adjustable floats height
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Possibility of use automatic weather data or a portable weather station via Bluetooth: Kestrel DROP & 5x00, WeatherFlow WEATHERmeter, Skywatch BL
• If you don't want to share your location, you can manually select any place in the world, the carburetor setups will be adapted for this place
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg for pressures
The application contains four tabs, which are described next:
• Results: In this tab two jetting setups are shown ('By regulation' and 'Freestyle'). These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs.
Also this tab lets do a fine tuning adjustment for all values for each carburetor config to adapt to the concrete engine.
Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too.
You can also see in a graphic form the calculated ratio of A/F (air and fuel) or Lambda
• History: This tab contains the history of all jetting setups. If you change the weather, or engine setup, or fine tuning, the new setup will be saved in history
• Engine: You can configure in this screen the information about the engine, that is, engine model, spark plug manufacturer, float type and height, fuel type, oil mix ratio and type of the track
• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.
Also this tab allows to use the GPS to get the current position and altitude, and connect to an external services to get the weather conditions of the nearest weather station.
In addition, this application can work with a pressure sensor built into the iPhone
For Rotax Max non-EVO Engine please try our other app: Jetting Rotax Max Kart
If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software
Hide..
Show more..
This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet. Internal barometer is used on supported devices for better precision. Application can run without GPS, WiFi and internet
• For Mini, Junior, Max, DD2 you can choose which cylinder you are using. At the Grand Finals 2016, the cylinders for the Mini and Junior classes were updated. At the Grand Finals 2017, the cylinders for classes Max and DD2 were updated. New cylinders require richer carburation
• Two different tuning modes: "By regulations" and "Freestyle"!
• In first mode, the following values are given: main jet, spark plug, spark plug gap, needle type and position (including intermediate positions with washer), air screw position, idle screw position, optimal water temp, gear oil recommendation
• In second mode (Freestyle), the following values are given: main jet, spark plug, emulsion tube, needle, needle type and position (including intermediate positions with washer), throttle valve, idle jet (outer pilot jet), idle emulsifier (inner pilot jet), air screw position
• Fine tuning for all these values
• History of all your carburetor setups
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Selectable fuel type (VP MS93, gasoline with or without ethanol)
• Adjustable fuel/oil ratio
• Adjustable floats height
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Possibility of use automatic weather data or a portable weather station via Bluetooth: Kestrel DROP & 5x00, WeatherFlow WEATHERmeter, Skywatch BL
• If you don't want to share your location, you can manually select any place in the world, the carburetor setups will be adapted for this place
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg for pressures
The application contains four tabs, which are described next:
• Results: In this tab two jetting setups are shown ('By regulation' and 'Freestyle'). These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs.
Also this tab lets do a fine tuning adjustment for all values for each carburetor config to adapt to the concrete engine.
Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too.
You can also see in a graphic form the calculated ratio of A/F (air and fuel) or Lambda
• History: This tab contains the history of all jetting setups. If you change the weather, or engine setup, or fine tuning, the new setup will be saved in history
• Engine: You can configure in this screen the information about the engine, that is, engine model, spark plug manufacturer, float type and height, fuel type, oil mix ratio and type of the track
• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.
Also this tab allows to use the GPS to get the current position and altitude, and connect to an external services to get the weather conditions of the nearest weather station.
In addition, this application can work with a pressure sensor built into the iPhone
For Rotax Max non-EVO Engine please try our other app: Jetting Rotax Max Kart
If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software
Screenshots
User Rating
4.25 out of 5
12 ratings in United Kingdom
5 star
9
4 star
0
3 star
1
2 star
1
1 star
1
Ratings History
Reviews
A few issues
* Fuel dropdown list doesn’t list anything similar to current UK fuels, Eg E10 95RON (would be better if you could create manual options if this list won’t be update) * Connects to my Kestrel 5x00 via Bluetooth in discovery mode, but doesn’t get saved there and I can’t work out how to retrieve info from the Kestrel to this app * Whatever settings I use, it still advises me the same just size (130) pretty much all the time I’ve emailed the developer, but have had no response. So it’s back to experimenting, and doing this all manually myself.
Terrible App
Mini Max jet settings are way off. 125 jet for a Mini Max? Seriously?
5
App very accurate on track, its not just a guide!
Review
Bravo! I always hits the target with this app. With lambda (A/F) feature I understood how carb works. Strongly recommend.
Good
With this app I won first place in last race :D Very useful :)
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
2
|
|
Top Paid
|
|
3
|
|
Top Paid
|
|
3
|
|
Top Paid
|
|
10
|
|
Top Paid
|
|
11
|
Keywords
Users may also like
| Name | Reviews | Recent release | |
|---|---|---|---|
Jetting for DellOrto VHSH PRO
The most complete jetting app
|
0
|
5 months ago | |
Jetting Max Kart for Rotax Max
|
1
|
4 months ago | |
LapSnap
Lap timer data analysis
|
2
|
1 week ago | |
Rotax Global
|
0
|
9 months ago | |
Rotax MAX Jetting
Carburetor Mainjet Setup
|
2
|
3 months ago | |
Kart Chassis Setup Premium
The original & most advanced
|
1
|
8 months ago | |
ALFANO ADA
ALFANO ADA
|
4
|
1 month ago | |
N/A/
N/A/
|
0
|
10 months ago | |
Jetting for Rotax Max EVO Kart
All categories and years
|
3
|
4 months ago | |
MyRaceLab
Lap Time Analytics
|
1
|
1 month ago |
Show More
Revenue and Downloads
Gain valuable insights into Jetting Rotax Max EVO Kart performance with our analytics. Sign up now
to
access downloads, revenue, and more.
App Info
- Category
- Sports
- Publisher
- BALLISTIC SOLUTIONS RESEARCH & DEVELOPMENT SOFTWARE SIARHEI RAICHONAK
- Languages
- English, Arabic, Catalan, Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek (modern), Hebrew (modern), Hungarian, Indonesian, Italian, Japanese, Korean, Malay, Norwegian Bokmål, Polish, Portuguese, Romanian, Russian, Chinese, Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
- Recent version
- 2.5 (2 years ago )
- Released on
- Feb 11, 2019 (5 years ago )
- Also available in
- United Kingdom, United States, Australia, Germany, Denmark, France, Italy, Russia, Brazil, Japan, South Africa, Hong Kong, Canada, Switzerland, Portugal, Austria, New Zealand, Netherlands, Mexico, Spain, Finland, Ireland, Argentina, Poland, Romania, Sweden, Singapore, Belgium, Czechia, Peru, United Arab Emirates, Ukraine, Taiwan, Turkey, Thailand, Belarus, Saudi Arabia, Chile, China, Dominican Republic, Norway, Hungary, Israel, Greece, Kazakhstan, Vietnam, Azerbaijan, India, Egypt, South Korea, Kuwait, Algeria, Lebanon, Ecuador, Colombia, Malaysia, Pakistan, Philippines, Indonesia, Nigeria
- Last updated
- 1 month ago