Ne fonctionne pas correctement
La position du satellite recherché n'est pas précise et change constamment. Bref, j'aurais pas dû l'acheter. Je voudrais biene faire rembourser.
SatFinder
Adjust your dish in seconds
#1 Keyword Rankings
Today
Top 10 Rankings
Today
Top 30 Rankings
Today
Top 100 Rankings
Today
Description
With the SatFinder you can adjust your satellite antenna in just a few seconds and in 4 simple steps:
STEP 1 - CHOOSE YOUR ANTENNA
Choose one of the four different antenna designs:
- Offset antennas (the most common, is slightly oval, the LNB is not in the middle).
- Special design (e.g. Oblong shaped Offset antenna, Multifeed antenna)
- Parabolic antenna (LNB is in the middle of the reflector, usually larger than 100cm)
- Flat or planar antenna (small, camping antennas)
If you have an offset antenna, enter the height and width of the antenna. If your antenna has a special design, enter the offset angle and the size of the satellite antenna. You will find the offset angle in the operating instructions for your satellite antenna. For parabolic antennas, it is sufficient to enter the antenna diameter. With a flat antenna, you do not have to set anything. If you know the exact antenna designation, check whether your antenna is already in the database.
Tip: Press the wizard button to measure the size of the satellite antenna using the iPhone camera and LiDAR scanner.
STEP 2 - CHOOSE YOUR SATELLITE
To quickly and easily select a suitable satellite, simply press the "AUTO" button. The SatFinder will now automatically search for satellites that are within your reception range and that offer TV or radio stations in your language (the language setting of your iPhone will be selected). The stars (1-10) shown in the table result from the number of radio and TV programmes offered and the reception strength at your location.
If you want to receive a specific satellite, switch off "AUTO": Now you can simply scroll through the table and select the satellite. The search function is quicker - just enter the name of the satellite, the channel or the orbit position. You can also reduce the number of table entries by hiding satellites that cannot be received at your location or that do not broadcast in your language. With the button "Channel Info" you can check which channels the selected satellite is currently broadcasting - including all channel parameters for your satellite receiver.
STEP 3 - CHECK FOR OBSTACLES
For smooth satellite reception, there must be no obstacles between the satellite and your satellite antenna. You can check this with the "View" function. Simply aim at the satellite and observe the signs (GREEN - no obstacle, RED - caution, view may not be clear).
Tip: Press the button for the assistant to activate the voice output.
STEP 4 - ADJUST THE ANTENNA
In the menu item "Align", different graphics appear depending on the selected antenna type. If you are using an offset antenna, you must adjust the azimuth and elevation separately. With planar or parabolic antennas, the angles are set together. Before you press the "Start" button, a video clip shows you how to position your iPhone on the antenna.
Tip: Press the button for the assistant to activate the voice output.
STEP 5 - FINE TUNING
If necessary, you can optimise the reception of your satellite system. The SatFinder provides you with the "FineTuning" function for this purpose. To use this function, you need a second iOS device. One device serves as a camera; the second device serves as a monitor. Simply place an iPhone in front of your reception screen and observe changes in the picture quality while you slightly turn or tilt your satellite antenna. With the FineTuning function, you have visual contact with your TV set even when you are not in sight.
THAT'S IT. YOU SHOULD NOW BE ABLE TO ENJOY INTERFERENCE-FREE SATELLITE RECEPTION...
Note: Satellite antenna tuning is only available on iOS devices with LiDAR sensor (e.g. iPhone 12 Pro).
Hide..
Show more..
STEP 1 - CHOOSE YOUR ANTENNA
Choose one of the four different antenna designs:
- Offset antennas (the most common, is slightly oval, the LNB is not in the middle).
- Special design (e.g. Oblong shaped Offset antenna, Multifeed antenna)
- Parabolic antenna (LNB is in the middle of the reflector, usually larger than 100cm)
- Flat or planar antenna (small, camping antennas)
If you have an offset antenna, enter the height and width of the antenna. If your antenna has a special design, enter the offset angle and the size of the satellite antenna. You will find the offset angle in the operating instructions for your satellite antenna. For parabolic antennas, it is sufficient to enter the antenna diameter. With a flat antenna, you do not have to set anything. If you know the exact antenna designation, check whether your antenna is already in the database.
Tip: Press the wizard button to measure the size of the satellite antenna using the iPhone camera and LiDAR scanner.
STEP 2 - CHOOSE YOUR SATELLITE
To quickly and easily select a suitable satellite, simply press the "AUTO" button. The SatFinder will now automatically search for satellites that are within your reception range and that offer TV or radio stations in your language (the language setting of your iPhone will be selected). The stars (1-10) shown in the table result from the number of radio and TV programmes offered and the reception strength at your location.
If you want to receive a specific satellite, switch off "AUTO": Now you can simply scroll through the table and select the satellite. The search function is quicker - just enter the name of the satellite, the channel or the orbit position. You can also reduce the number of table entries by hiding satellites that cannot be received at your location or that do not broadcast in your language. With the button "Channel Info" you can check which channels the selected satellite is currently broadcasting - including all channel parameters for your satellite receiver.
STEP 3 - CHECK FOR OBSTACLES
For smooth satellite reception, there must be no obstacles between the satellite and your satellite antenna. You can check this with the "View" function. Simply aim at the satellite and observe the signs (GREEN - no obstacle, RED - caution, view may not be clear).
Tip: Press the button for the assistant to activate the voice output.
STEP 4 - ADJUST THE ANTENNA
In the menu item "Align", different graphics appear depending on the selected antenna type. If you are using an offset antenna, you must adjust the azimuth and elevation separately. With planar or parabolic antennas, the angles are set together. Before you press the "Start" button, a video clip shows you how to position your iPhone on the antenna.
Tip: Press the button for the assistant to activate the voice output.
STEP 5 - FINE TUNING
If necessary, you can optimise the reception of your satellite system. The SatFinder provides you with the "FineTuning" function for this purpose. To use this function, you need a second iOS device. One device serves as a camera; the second device serves as a monitor. Simply place an iPhone in front of your reception screen and observe changes in the picture quality while you slightly turn or tilt your satellite antenna. With the FineTuning function, you have visual contact with your TV set even when you are not in sight.
THAT'S IT. YOU SHOULD NOW BE ABLE TO ENJOY INTERFERENCE-FREE SATELLITE RECEPTION...
Note: Satellite antenna tuning is only available on iOS devices with LiDAR sensor (e.g. iPhone 12 Pro).
Screenshots
User Rating
4.48 out of 5
153 ratings in Belgium
5 star
103
4 star
33
3 star
10
2 star
2
1 star
5
Ratings History
Reviews
👍👍👍👍
Gemakkelijk 👍
heel goed
astra 3 is nu gemakkelijk te vinden
No value
You Can see the Sateliet, but it changes constantly ... I couldn't adjust my dish. 2€ lost.
Wonderbaarlijke app!!! Nooit meer zoeken
Fantastische app die perfect werkt! Na het invoeren vd grote van je schotel is het een koud kunstje om de juiste sateliet te vinden. Geen geprul meer met kompas, waar je ook bent direct de sateliet gevonden. Mega cool!!!
Arnaque!!
Ne fonctionne pas, ne vaut pas son prix... Je me sent volé!!
Sat Finder super!!!
J'étais hésitant pour acheter cette application car beaucoup sont gratuites mais là j'ai été agréablement surpris ! En moins de cinq minutes j'étais orienté et régler ma parabole et finalement j'ai pas retrouvé mon satellite ! Croyez-moi c'est application fonctionne à merveille sur l'iPhone cinq ! Si vous ne réussissez pas croyez-moi c'est votre faute car il faut suivre bien les étapes et avoir de la patience car le signal satellite apparaît seulement après 2 à 3 secondes. A recommandé absolument !
Super tool
Waw unbelievble! It help me in 5 min to fix my parabol. Thx :)
Arnaque
Il ne faux pas acheter cette application elle ne fonctionne pas du tous impression niveaux satellite complètement à l'ouest cette application
Das Geld kann man sicht echt sparen !!!
Hätte ich nicht eine andere Methode gefunden , wäre ich sehr wahrscheinlich heute noch den Astra Satellite am suchen !!!
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
7
|
|
Top Paid
|
|
8
|
|
Top Paid
|
|
16
|
|
Top Paid
|
|
24
|
|
Top Paid
|
|
28
|
Keywords
Users may also like
| Name | Reviews | Recent release | |
|---|---|---|---|
SatFinder (MGE)
|
0
|
2 years ago | |
SatFinder 3D - Dish LNB Setup
Augmented Reality Dish Pointer
|
0
|
4 months ago | |
LIONTRON Multi
|
0
|
1 year ago | |
e2Remote Lite
for Dreambox, Vu+ and more
|
0
|
1 year ago | |
Senso4s
|
0
|
9 months ago | |
SatCatcher-Dish Set & Pointing
Satellite Dish Install & Align
|
0
|
4 months ago | |
Satellite Transponders
Satellite dish installation
|
3
|
4 months ago | |
DishPointer (Satellite Finder)
Quick Precise Sat-Dish Install
|
0
|
4 months ago | |
Installation parabole
|
20
|
9 months ago | |
SatFinder Pro - RV Satellite
Satellite Director
|
3
|
4 months ago |
Show More
Revenue and Downloads
Gain valuable insights into SatFinder performance with our analytics. Sign up now
to
access downloads, revenue, and more.
App Info
- Category
- Utilities
- Publisher
- Ralf Andrae
- Languages
- English, Croatian, Dutch, French, German, Greek (modern), Hindi, Italian, Japanese, Malay, Polish, Portuguese, Russian, Chinese, Spanish, Swedish, Turkish, Ukrainian
- Recent version
- 5.0.4 (1 month ago )
- Released on
- Oct 21, 2010 (13 years ago )
- Also available in
- Germany, Switzerland, Netherlands, Austria, Norway, United States, United Kingdom, Spain, Russia, Italy, France, Belgium, Denmark, Sweden, Poland, Canada, Brazil, Australia, Chile, Saudi Arabia, Greece, Mexico, Turkey, Czechia, Portugal, Romania, China, Ireland, United Arab Emirates, Hungary, Kuwait, Lebanon, South Africa, Colombia, Israel, Indonesia, New Zealand, Ecuador, Malaysia, Thailand, Argentina, Japan, Kazakhstan, Egypt, Finland, Ukraine, Azerbaijan, Dominican Republic, Pakistan, Algeria, Taiwan, Peru, Belarus, South Korea, India, Hong Kong, Nigeria, Philippines, Singapore, Vietnam
- Last updated
- 4 weeks ago