Description
This app provides, for the current weather conditions and a given engine configuration (engine model, floats, etc.), four jetting recommendations for TM K9, K9B, K9C, KZ10, KZ10B, KZ10C and KZ-R1 engines that have DellOrto VHSHS30 carbs.
In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, four different jetting setups are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs. For each jetting setup, the following values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). Under the recommended main jet, the calculated real value with decimals is shown. Besides this jetting information, the air density, density altitude and relative horsepower are shown too. In addition, this tab lets do a fine tunning adjustment for the main (high), needle (mid) and pilot (low) circuits for each jetting setup to adapt to the concrete engine.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you can configure in this screen the information about the engine, that is, the engine model (K9, K9B, K9C, KZ10, KZ10B, KZ10C, KZ-R1), the float type and height, the oil mix ratio and the type of the circuit (spring or road racing, short or long). Depending of the track type, the jetting setups will be adapted.
- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.
Hide..
Show more..
In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, four different jetting setups are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs. For each jetting setup, the following values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). Under the recommended main jet, the calculated real value with decimals is shown. Besides this jetting information, the air density, density altitude and relative horsepower are shown too. In addition, this tab lets do a fine tunning adjustment for the main (high), needle (mid) and pilot (low) circuits for each jetting setup to adapt to the concrete engine.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you can configure in this screen the information about the engine, that is, the engine model (K9, K9B, K9C, KZ10, KZ10B, KZ10C, KZ-R1), the float type and height, the oil mix ratio and the type of the circuit (spring or road racing, short or long). Depending of the track type, the jetting setups will be adapted.
- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.
Screenshots
User Rating
App is not rated in Vietnam yet.
Ratings History
Gemischbildung für TM KZ Kart Installs
Last 30 days
Gemischbildung für TM KZ Kart Revenue
Last 30 daysJetting TM Kart for KZ / ICC Reviews
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
45
|
|
Top Paid
|
|
57
|
|
Top Paid
|
|
64
|
|
Top Paid
|
|
79
|
|
Top Paid
|
|
79
|
Keywords
Jetting TM Kart for KZ / ICC Competitors
| Name | Reviews | Recent release | |
|---|---|---|---|
Jetting for TM KZ / ICC Kart
for KZ-R1, KZ10, K9 engines
|
0
|
2 years ago | |
Jetting Modena KZ1 / KZ2 Kart
KK1, KK1R, MKZ, KK2 engines
|
0
|
2 years ago | |
Jetting Vortex KZ1 / KZ2 Kart
RTZ, RSZ, RKZ, RVZ, RVXX, RVX
|
0
|
2 years ago | |
Jetting IAME KZ1 / KZ2 Kart
Screamer 1, 2, 3 and Shifter
|
0
|
2 years ago | |
Jetting Rotax Max EVO Kart
for Micro Mini Junior Max DD2
|
0
|
2 years ago | |
Jetting Rotax Max Kart
for Micro, Mini Junior Max DD2
|
0
|
2 years ago | |
Jetting for IAME X30 Karting
for X30, Super X30 & Leopard
|
0
|
2 years ago | |
Kart Chassis Setup PRO
karting tools for racers
|
0
|
2 years ago | |
Jetting IAME SWIFT & GAZELLE
get best carburetor config
|
0
|
2 years ago | |
Unipro ApS
Connect with Unipro device
|
0
|
1 year ago |
Jetting TM Kart for KZ / ICC Revenue and Downloads
Gain valuable insights into Gemischbildung für TM KZ Kart performance with our analytics.
Sign up now to access downloads, revenue, and more.
Sign up now to access downloads, revenue, and more.
App Info
- Category
- Sports
- Publisher
-
ISEnet
- Languages
- Arabic, Catalan, Czech, Danish, Dutch, English, Finnish, French, German, Greek (modern), Hebrew (modern), Hungarian, Indonesian, Italian, Japanese, Korean, Malay, Norwegian Bokmål, Polish, Portuguese, Romanian, Russian, Chinese, Slovak, Spanish, Swedish, Thai, Chinese, Turkish, Ukrainian, Vietnamese
- Recent version
- 1.9 (11 months ago )
- Released on
- Mar 1, 2014 (10 years ago )
- Also available in
- Germany, Belgium, Netherlands, Switzerland, Pakistan, Portugal, Philippines, Peru, New Zealand, Norway, Nigeria, Malaysia, Mexico, Lebanon, Kazakhstan, Kuwait, South Korea, Japan, Poland, India, Romania, Russia, Saudi Arabia, Sweden, Singapore, Thailand, Turkey, Taiwan, Ukraine, United States, Vietnam, South Africa, Algeria, Argentina, Austria, Australia, Azerbaijan, Brazil, Belarus, Canada, Chile, China, Colombia, Czechia, Denmark, Dominican Republic, Italy, Ecuador, Egypt, Spain, Finland, France, United Kingdom, Greece, Hong Kong, Hungary, Indonesia, Ireland, Israel, United Arab Emirates
- Last updated
- 3 weeks ago