Perfecta para electricistas
Muy buena app con un montón de herramientas para cualquier electricista o ingeniero. 100% recomendable.
Description
Tool to support the calculation of electrical installations that will allow the user (designer/electrician/technician) to perform electrical calculations easily and quickly.
· Dimensioning complete of low voltage circuits with the most frequent installation methods
· Phase cable size, neutral, protective conductor
· Criteria based on the admissible current of the cable, voltage drop and overcurrent protection
· Designation of the most used cables.
· Circuits with automatic circuit breaker until In=4000 A (Ir rating setting), maximum fuse In=1600 A (gG type), maximum 12 conductors parallel per phase, maximum size 630 mm²
· Short-circuits, including MV network, LV lines and final circuit
· Estimate of the maximum short-circuit current (simplified method)
· Maximum protected length for minimum short circuit (approximate method)
· Earthing system with diferentes types of electrodes (rods, buried conductor, rings and grid)
· Distance between the earthing systems
· Forecast of loads of a building destined to houses with several sections: dwellings, common services, commercial premises/offices and garage with/without infrastructure for recharging electric vehicles
· Reactive power of the capacitor bank for the compensation of the power factor (cos φ) and capacity (µF) of the capacitors
· C/K Factor for automatic capacitor bank
· Frequency resonance capacitors
· Compensation of the power factor for a three-phase transformer
· Choice of installation system in the function of the circuit, cable and its situation
· Overvoltage due to defects to earth in medium voltage MV depending on the earthing systems
· Power in an unbalanced three-phase system
· Overvoltages due to loss of neutral conductor, earth fault and short circuit
· Electricity parameters of a single-phase or three-phase (balanced)
· Transformer performance
· Secondary voltage of a transformer acoording to switch position
· Distribution of load of transformers in parallel
· K-Factor transformer
· Current transformer
· Verification resistance of the assembly to short-circuits
· Dissipated power of a assembly
· Size of trays and conduits
· Conduits characteristics according to the installation method
· Conversions of wire sizes (mm²-awg) and conduits threads
· Impedance, resistance and reactance of a cable
· Representation of the curves of the protections
· International protection IP - IK
Parameter settings for calculations:
· Constants (voltages, conductivity, temperatures, etc.) that affect electrical calculations
· Protections (circuit breakers and fuses)
· Selection of minimum rate for circuit-breakers with regulation and maximum cable size for multi-conductor grouping per phase
· Method estimation of the reactance
· Conductivity of the conductor depending on the current of the circuit (constant, according to the expected current, maximum cable temperature)
· Use reduction factors by grouping cables/circuits
· Use of factors of diversity/utilization
· Reference documents: IEC Standards, REBT (sp), Technical Application Guide, (UE) 2016/364
IN NO CASE SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES AS A RESULT OF THE CORRECT OR INCORRECT USE OF THE APPLICATION
Hide
Show More...
· Dimensioning complete of low voltage circuits with the most frequent installation methods
· Phase cable size, neutral, protective conductor
· Criteria based on the admissible current of the cable, voltage drop and overcurrent protection
· Designation of the most used cables.
· Circuits with automatic circuit breaker until In=4000 A (Ir rating setting), maximum fuse In=1600 A (gG type), maximum 12 conductors parallel per phase, maximum size 630 mm²
· Short-circuits, including MV network, LV lines and final circuit
· Estimate of the maximum short-circuit current (simplified method)
· Maximum protected length for minimum short circuit (approximate method)
· Earthing system with diferentes types of electrodes (rods, buried conductor, rings and grid)
· Distance between the earthing systems
· Forecast of loads of a building destined to houses with several sections: dwellings, common services, commercial premises/offices and garage with/without infrastructure for recharging electric vehicles
· Reactive power of the capacitor bank for the compensation of the power factor (cos φ) and capacity (µF) of the capacitors
· C/K Factor for automatic capacitor bank
· Frequency resonance capacitors
· Compensation of the power factor for a three-phase transformer
· Choice of installation system in the function of the circuit, cable and its situation
· Overvoltage due to defects to earth in medium voltage MV depending on the earthing systems
· Power in an unbalanced three-phase system
· Overvoltages due to loss of neutral conductor, earth fault and short circuit
· Electricity parameters of a single-phase or three-phase (balanced)
· Transformer performance
· Secondary voltage of a transformer acoording to switch position
· Distribution of load of transformers in parallel
· K-Factor transformer
· Current transformer
· Verification resistance of the assembly to short-circuits
· Dissipated power of a assembly
· Size of trays and conduits
· Conduits characteristics according to the installation method
· Conversions of wire sizes (mm²-awg) and conduits threads
· Impedance, resistance and reactance of a cable
· Representation of the curves of the protections
· International protection IP - IK
Parameter settings for calculations:
· Constants (voltages, conductivity, temperatures, etc.) that affect electrical calculations
· Protections (circuit breakers and fuses)
· Selection of minimum rate for circuit-breakers with regulation and maximum cable size for multi-conductor grouping per phase
· Method estimation of the reactance
· Conductivity of the conductor depending on the current of the circuit (constant, according to the expected current, maximum cable temperature)
· Use reduction factors by grouping cables/circuits
· Use of factors of diversity/utilization
· Reference documents: IEC Standards, REBT (sp), Technical Application Guide, (UE) 2016/364
IN NO CASE SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES AS A RESULT OF THE CORRECT OR INCORRECT USE OF THE APPLICATION
Screenshots
InstElectric Pro FAQ
-
Is InstElectric Pro free?
InstElectric Pro is not free (it costs 5.00), however it doesn't contain in-app purchases or subscriptions.
-
Is InstElectric Pro legit?
Not enough reviews to make a reliable assessment. The app needs more user feedback.
Thanks for the vote -
How much does InstElectric Pro cost?
The price of InstElectric Pro is 5.00.
-
What is InstElectric Pro revenue?
To get estimated revenue of InstElectric Pro app and other AppStore insights you can sign up to AppTail Mobile Analytics Platform.
User Rating
App is not rated in Switzerland yet.
Ratings History
InstElectric Pro Reviews
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
40
|
|
Top Paid
|
|
265
|
|
Top Paid
|
|
336
|
|
Top Paid
|
|
403
|
|
Top Paid
|
|
419
|
Keywords
InstElectric Pro Competitors
| Name | Downloads (30d) | Monthly Revenue | Reviews | Ratings | Recent release | |
|---|---|---|---|---|---|---|
SolarMeter Sonnen Energie Maß
Photovoltaik Solarstromrechner
|
Unlock
|
Unlock
|
0
|
|
3 years ago | |
Netzberechnungen
Elektrotechnik
|
Unlock
|
Unlock
|
0
|
|
3 years ago | |
Konstruktiver Ingenieurbau
Arbeitet in USCS und SI Units
|
Unlock
|
Unlock
|
0
|
|
2 days ago | |
ElectroMaster Pro
Energy in your hands
|
Unlock
|
Unlock
|
0
|
|
1 year ago | |
Beam Calculator - Steel & Wood
Quickly solve steel/wood beams
|
Unlock
|
Unlock
|
0
|
|
3 years ago | |
Hydraulik & Wasserwerk Rechner
Wasserkopf, Reynolds
|
Unlock
|
Unlock
|
0
|
|
2 years ago | |
LAB68
|
Unlock
|
Unlock
|
0
|
|
10 months ago | |
N/A
Mobile Equationseditor
|
Unlock
|
Unlock
|
0
|
|
1 year ago | |
Solar Consult Pro
|
Unlock
|
Unlock
|
0
|
|
5 years ago | |
Berechnung des ankervolumens
Chemischen verankerung
|
Unlock
|
Unlock
|
0
|
|
4 months ago |
InstElectric Pro Electricidad Installs
Last 30 days
InstElectric Pro Electricidad Revenue
Last 30 daysInstElectric Pro Revenue and Downloads
Gain valuable insights into InstElectric Pro Electricidad performance with our analytics.
Sign up now to access downloads, revenue, and more.
Sign up now to access downloads, revenue, and more.
App Info
- Category
- Productivity
- Publisher
-
Angel Martinez
- Languages
- Spanish, French, English, Portuguese
- Recent release
- 2.9.1 (11 months ago )
- Released on
- Jan 4, 2019 (5 years ago )
- Also available in
- Spain , France , Brazil , United States , United Kingdom , Portugal , Thailand , Germany , Hungary , Colombia , Russia , Netherlands , New Zealand , Norway , Poland , Nigeria , Malaysia , Mexico , Lebanon , Kazakhstan , Kuwait , Peru , Philippines , Pakistan , India , Romania , Saudi Arabia , Sweden , Singapore , Türkiye , Taiwan , Ukraine , Vietnam , South Africa , Dominican Republic , Argentina , Austria , Australia , Azerbaijan , Belgium , Belarus , Canada , Switzerland , Chile , China , Czechia , Denmark , South Korea , Algeria , Ecuador , Egypt , Finland , Greece , Hong Kong SAR China , Indonesia , Ireland , Israel , United Arab Emirates , Italy , Japan
- Last Updated
- 1 day ago
This page includes copyrighted content from third parties, shared solely for commentary and research in accordance with fair use under applicable copyright laws. All trademarks, including product, service, and company names or logos, remain the property of their respective owners. Their use here falls under nominative fair use as outlined by trademark laws and does not suggest any affiliation with or endorsement by the trademark holders.