Great app for any RF engineer
This is one of the most useful apps I have on my Ipad! If you are in the broadcast engineering business, this will be an indispensible app for you!
iSlipstick RF
Published by:
Sam Virgillo
Description
iSlipstick RF
iSlipstick RF contains all of the functionality of the standard iSlipstick plus many functions specifically for RF work.
RF Calculators included with iSlipstick RF are:
PATH LOSS – Enter all of the RF link parameters such as transmitter output power, antenna gain, cable loss, distance and frequency to find the actual RF level at the receiver.
MICROWAVE DISH BEAMWIDTH & GAIN – Enter the dish size, frequency and efficiency to find the 3 dB beamwidth and antenna gain.
WAVELENGTH – Metric & U.S.
RETURN LOSS / VSWR – Enter forward and reflected power to find VSWR, reflection coefficient and return loss.
FRESNEL ZONE – Enter link distance, obstacle distance and frequency to find the 60% and 80% zone radii. This calculator also provides a visual display of ground clearance.
VELOCITY FACTOR (VOP) – Enter the dielectric constant of a coax to find the Velocity of Propagation and enter the cable length to find the propagation delay. This calculator can also find the necessary cable length for a given delay and VOP.
INTERMODULATION – Enter up to six frequencies to find the 2nd, 3rd, 5th and 7th intermod products that can be created. A 'hit' window can be set to eliminate out of band results.
I.F. FREQUENCY – Enter the incoming carrier frequency and 1st local oscillator frequency to find the resulting I.F. and whether the spectrum is inverted or normal. This is a great calculator when working with up/down converters.
INTERCEPT POINT – Once you have determined the levels of fundamental and intermodulation tones in a system, you can enter those values into this calculator to find either IP2 or IP3.
Standard Calculators included in iSlipstick RF are:
OHM'S LAW – Find voltage, current, resistance and power.
REACTANCE – Find inductive and capacitive reactance by entering frequency and capacitance or inductance.
RESONANCE – Find the resonant frequency of an inductor – capacitor pair.
VOLTAGE DIVIDER – Enter the voltage into a resistor divider network to find the output voltage.
PARALLEL RESISTOR – Enter up to six resistor values to find the resultant parallel resistance.
SERIES and PARALLEL RLC – Enter R, C and L of a series or parallel circuit to find the impedance and phase angle.
OP-AMP – Find the gain of either an inverting or non-inverting op-amp circuit.
TIME CONSTANT - Find the first 5 time constants of both RC and RL circuits.
Standard Converters included in iSlipstick RF are:
RESISTOR COLOR CODE – Enter a resistor value to find the color code or enter the color code to find the resistor value.
SMD RESISTOR – Enter 3 digit or 4 digit SMD codes to find the resistance value.
Also does EIA-96 conversion.
VOLTAGE CONVERTER – Convert between RMS, average, peak and p-p values.
dB CONVERTER – Convert dBm, dBV, dBW and dBuV to absolute values and vice-versa in 50, 75 and 600 ohm load.
TEMPERATURE – Convert between four popular scales.
PERIOD – FREQUENCY – Convert waveform period to frequency and vice-versa.
LENGTH, AREA, VOLUME, CAPACITY and WEIGHT – Convert from metric to U.S. and vice-versa. Also convert within same standard.
A help page is also available as a quick function guide.
Tested with iOS 12.0 thru iOS 15.1
Hide
Show More...
iSlipstick RF contains all of the functionality of the standard iSlipstick plus many functions specifically for RF work.
RF Calculators included with iSlipstick RF are:
PATH LOSS – Enter all of the RF link parameters such as transmitter output power, antenna gain, cable loss, distance and frequency to find the actual RF level at the receiver.
MICROWAVE DISH BEAMWIDTH & GAIN – Enter the dish size, frequency and efficiency to find the 3 dB beamwidth and antenna gain.
WAVELENGTH – Metric & U.S.
RETURN LOSS / VSWR – Enter forward and reflected power to find VSWR, reflection coefficient and return loss.
FRESNEL ZONE – Enter link distance, obstacle distance and frequency to find the 60% and 80% zone radii. This calculator also provides a visual display of ground clearance.
VELOCITY FACTOR (VOP) – Enter the dielectric constant of a coax to find the Velocity of Propagation and enter the cable length to find the propagation delay. This calculator can also find the necessary cable length for a given delay and VOP.
INTERMODULATION – Enter up to six frequencies to find the 2nd, 3rd, 5th and 7th intermod products that can be created. A 'hit' window can be set to eliminate out of band results.
I.F. FREQUENCY – Enter the incoming carrier frequency and 1st local oscillator frequency to find the resulting I.F. and whether the spectrum is inverted or normal. This is a great calculator when working with up/down converters.
INTERCEPT POINT – Once you have determined the levels of fundamental and intermodulation tones in a system, you can enter those values into this calculator to find either IP2 or IP3.
Standard Calculators included in iSlipstick RF are:
OHM'S LAW – Find voltage, current, resistance and power.
REACTANCE – Find inductive and capacitive reactance by entering frequency and capacitance or inductance.
RESONANCE – Find the resonant frequency of an inductor – capacitor pair.
VOLTAGE DIVIDER – Enter the voltage into a resistor divider network to find the output voltage.
PARALLEL RESISTOR – Enter up to six resistor values to find the resultant parallel resistance.
SERIES and PARALLEL RLC – Enter R, C and L of a series or parallel circuit to find the impedance and phase angle.
OP-AMP – Find the gain of either an inverting or non-inverting op-amp circuit.
TIME CONSTANT - Find the first 5 time constants of both RC and RL circuits.
Standard Converters included in iSlipstick RF are:
RESISTOR COLOR CODE – Enter a resistor value to find the color code or enter the color code to find the resistor value.
SMD RESISTOR – Enter 3 digit or 4 digit SMD codes to find the resistance value.
Also does EIA-96 conversion.
VOLTAGE CONVERTER – Convert between RMS, average, peak and p-p values.
dB CONVERTER – Convert dBm, dBV, dBW and dBuV to absolute values and vice-versa in 50, 75 and 600 ohm load.
TEMPERATURE – Convert between four popular scales.
PERIOD – FREQUENCY – Convert waveform period to frequency and vice-versa.
LENGTH, AREA, VOLUME, CAPACITY and WEIGHT – Convert from metric to U.S. and vice-versa. Also convert within same standard.
A help page is also available as a quick function guide.
Tested with iOS 12.0 thru iOS 15.1
Screenshots
iSlipstick RF FAQ
-
Is iSlipstick RF free?
Yes, iSlipstick RF is completely free and it doesn't have any in-app purchases or subscriptions.
-
Is iSlipstick RF legit?
Not enough reviews to make a reliable assessment. The app needs more user feedback.
Thanks for the vote -
How much does iSlipstick RF cost?
iSlipstick RF is free.
-
What is iSlipstick RF revenue?
To get estimated revenue of iSlipstick RF app and other AppStore insights you can sign up to AppTail Mobile Analytics Platform.
User Rating
App is not rated in Austria yet.
Ratings History
iSlipstick RF Reviews
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
422
|
|
Top Paid
|
|
486
|
iSlipstick RF Competitors
| Name | Downloads (30d) | Monthly Revenue | Reviews | Ratings | Recent release | |
|---|---|---|---|---|---|---|
RF Haversine - Radio Profile
MW Link Budget & Path Profile
|
Unlock
|
Unlock
|
0
|
|
11 months ago | |
ArrayCalc Viewer
|
Unlock
|
Unlock
|
0
|
|
1 year ago | |
CircuitShepherd
electronic circuit optimizer
|
Unlock
|
Unlock
|
0
|
|
11 months ago | |
i41CX
RPN Calc
|
Unlock
|
Unlock
|
2
|
|
2 months ago | |
Smith Charts
|
Unlock
|
Unlock
|
0
|
|
2 years ago | |
RF Path
|
Unlock
|
Unlock
|
0
|
|
7 months ago | |
Calctronics: Elektronische
Elektronik-Designtools
|
Unlock
|
Unlock
|
0
|
|
5 months ago | |
matchedRF
automated impedance matching
|
Unlock
|
Unlock
|
0
|
|
1 year ago | |
iSmith
Understanding matching network
|
Unlock
|
Unlock
|
0
|
|
2 years ago | |
Resistor ToolKit, Color Codes
Get started with Electronics
|
Unlock
|
Unlock
|
0
|
|
2 years ago | |
Codebook - AI Coding Companion
AI-Powered Coding Companion
|
Unlock
|
Unlock
|
0
|
|
2 weeks ago | |
NetLogger Companion
For Amateur Radio Operators
|
Unlock
|
Unlock
|
0
|
|
1 month ago |
iSlipstick RF Installs
Last 30 days
iSlipstick RF Revenue
Last 30 daysiSlipstick RF Revenue and Downloads
Gain valuable insights into iSlipstick RF performance with our analytics.
Sign up now to access downloads, revenue, and more.
Sign up now to access downloads, revenue, and more.
App Info
- Category
- Productivity
- Publisher
- Sam Virgillo
- Languages
- English
- Recent release
- 1.6.2 (3 years ago )
- Released on
- Jan 28, 2010 (14 years ago )
- Also available in
- United States , Pakistan , India , Italy , Japan , South Korea , Kuwait , Kazakhstan , Lebanon , Mexico , Malaysia , Nigeria , Netherlands , Norway , New Zealand , Peru , Philippines , Israel , Poland , Portugal , Romania , Russia , Saudi Arabia , Sweden , Singapore , Thailand , Türkiye , Taiwan , Ukraine , Vietnam , South Africa , Germany , Argentina , Austria , Australia , Azerbaijan , Belgium , Bulgaria , Brunei , Brazil , Belarus , Canada , Switzerland , Chile , China , Colombia , Czechia , United Arab Emirates , Denmark , Dominican Republic , Algeria , Ecuador , Egypt , Spain , Finland , France , United Kingdom , Greece , Hong Kong SAR China , Hungary , Indonesia , Ireland
- Last Updated
- 12 hours ago
This page includes copyrighted content from third parties, shared solely for commentary and research in accordance with fair use under applicable copyright laws. All trademarks, including product, service, and company names or logos, remain the property of their respective owners. Their use here falls under nominative fair use as outlined by trademark laws and does not suggest any affiliation with or endorsement by the trademark holders.