Description
This app provides, for the current weather conditions and a given engine configuration (engine model, gas, etc.), a jetting and exhaust length recommendation for IAME Parilla X30 Senior or Junior (Tillotson & Tryton carbs), X30 Super 175cc & Leopard engines.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next.
- Results: In this tab, a recommended jetting and exhaust length setup are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and exhaust length. Besides this information, the air density and density altitude are shown too. In addition, this tab lets do a fine tunning adjustment for the high and low needles to adapt to the concrete engine.
- Weather: In the second tab, called Weather, you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: You must set in this screen the information about the engine, that is, the engine type (Leopard, X30 Senior, X30 Junior X30 Super), carburetor, exhaust restrictions (for Junior engines), the oil mix ratio and the type of the circuit (short or long tracks). Depending of the track type, the jetting setups will be adapted.
- GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
Hide..
Show more..
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next.
- Results: In this tab, a recommended jetting and exhaust length setup are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and exhaust length. Besides this information, the air density and density altitude are shown too. In addition, this tab lets do a fine tunning adjustment for the high and low needles to adapt to the concrete engine.
- Weather: In the second tab, called Weather, you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: You must set in this screen the information about the engine, that is, the engine type (Leopard, X30 Senior, X30 Junior X30 Super), carburetor, exhaust restrictions (for Junior engines), the oil mix ratio and the type of the circuit (short or long tracks). Depending of the track type, the jetting setups will be adapted.
- GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
Screenshots
User Rating
App is not rated in Kazakhstan yet.
Ratings History
Jetting for IAME kart engines Installs
Last 30 days
Jetting for IAME kart engines Revenue
Last 30 daysJetting for IAME kart engines Reviews
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
16
|
|
Top Paid
|
|
20
|
|
Top Paid
|
|
62
|
|
Top Paid
|
|
82
|
|
Top Paid
|
|
86
|
Keywords
Jetting for IAME kart engines Competitors
| Name | Reviews | Recent release | |
|---|---|---|---|
Jetting IAME KZ1 / KZ2 Kart
Screamer 1, 2, 3 and Shifter
|
0
|
2 years ago | |
Jetting Rotax Max EVO Kart
for Micro Mini Junior Max DD2
|
0
|
2 years ago | |
Jetting for IAME X30 Karting
for X30, Super X30 & Leopard
|
0
|
2 years ago | |
Kart Chassis Setup PRO
karting tools for racers
|
0
|
2 years ago | |
Jetting IAME SWIFT & GAZELLE
get best carburetor config
|
0
|
2 years ago | |
Jetting TM Racing OK & OK-J
best carburetor config S1 & S2
|
0
|
2 years ago | |
Jetting Vortex ROK GP Kart
get best carburetor config
|
0
|
2 years ago | |
Jetting IAME KA100 & KFS FFSA
get best carburetor config
|
0
|
2 years ago | |
Jetting Vortex OK & OK-Junior
get best carburetor config
|
0
|
2 years ago | |
Jetting IAME OK OK-Junior Kart
best carb config for Reedster
|
0
|
2 years ago |
Jetting for IAME kart engines Revenue and Downloads
Gain valuable insights into Jetting for IAME kart engines performance with our analytics.
Sign up now to access downloads, revenue, and more.
Sign up now to access downloads, revenue, and more.
App Info
- Category
- Sports
- Publisher
-
ISEnet
- Languages
- German, Arabic, Danish, English, Finnish, French, Greek (modern), Hebrew (modern), Indonesian, Italian, Japanese, Korean, Malay, Dutch, Norwegian Bokmål, Polish, Portuguese, Romanian, Swedish, Slovak, Spanish, Thai, Chinese, Czech, Turkish, Ukrainian, Hungarian, Vietnamese
- Recent version
- 1.7 (11 months ago )
- Released on
- Nov 10, 2015 (8 years ago )
- Also available in
- Pakistan, Italy, Japan, South Korea, Kuwait, Kazakhstan, Lebanon, Mexico, Malaysia, Nigeria, Netherlands, Norway, New Zealand, Peru, Philippines, India, Poland, Portugal, Romania, Russia, Saudi Arabia, Sweden, Singapore, Thailand, Turkey, Taiwan, Ukraine, United States, Vietnam, South Africa, Denmark, Argentina, Austria, Australia, Azerbaijan, Belgium, Brazil, Belarus, Canada, Switzerland, Chile, China, Colombia, Czechia, Germany, United Arab Emirates, Dominican Republic, Algeria, Ecuador, Egypt, Spain, Finland, France, United Kingdom, Greece, Hong Kong, Hungary, Indonesia, Ireland, Israel
- Last updated
- 3 weeks ago