Description
This app provides, using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, a recommendation about the jetting configuration to use for KTM 2-strokes MX and enduro bikes (SX, SXS, EXC, XC and MXC models).
In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown (screw position is expressed in turns from fully tightened). These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. Under the recommended main jet, the calculated real value with decimals is shown. The air density and density altitude are shown too. In addition, this tab lets do a fine tuning adjustment to adapt to a concrete engine (you know that each engine has its own personality).
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you can set in this screen the information about the engine, that is, the model year, model and carburetor, and the oil mix ratio that you\'re using.
- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.
Valid for the following models from 2005 to 2024:
- 50 SX: 2005-2024.
- 50 SX Factory Edition: 2021-2024.
- 50 SX Mini: 2017-2024.
- 65 SX: 2017-2024.
- 85 SX: 2005-2024.
- 105 SX: 2006-2012.
- 125 SX: 2005-2022.
- 125 SXS: 2005-2007.
- 125 EXC: 2005-2016.
- 125 XC: 2017-2018.
- 144 SX: 2007-2008.
- 150 SX: 2009-2022.
- 150 XC: 2010, 2012, 2013, 2014, 2017, 2018, 2019.
- 200 EXC: 2005-2016.
- 200 XC: 2005-2012.
- 250 SX: 2005-2022.
- 250 SXS: 2005-2007.
- 250 XC: 2007-2019.
- 250 EXC: 2005-2018.
- 300 EXC: 2005-2018.
- 300 XC: 2009-2018.
- 300 MXC: 2005.
* Please note that the application is valid only for engines that use carburetor. Not valid for fue injection engines.
Hide..
Show more..
In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown (screw position is expressed in turns from fully tightened). These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. Under the recommended main jet, the calculated real value with decimals is shown. The air density and density altitude are shown too. In addition, this tab lets do a fine tuning adjustment to adapt to a concrete engine (you know that each engine has its own personality).
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you can set in this screen the information about the engine, that is, the model year, model and carburetor, and the oil mix ratio that you\'re using.
- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.
Valid for the following models from 2005 to 2024:
- 50 SX: 2005-2024.
- 50 SX Factory Edition: 2021-2024.
- 50 SX Mini: 2017-2024.
- 65 SX: 2017-2024.
- 85 SX: 2005-2024.
- 105 SX: 2006-2012.
- 125 SX: 2005-2022.
- 125 SXS: 2005-2007.
- 125 EXC: 2005-2016.
- 125 XC: 2017-2018.
- 144 SX: 2007-2008.
- 150 SX: 2009-2022.
- 150 XC: 2010, 2012, 2013, 2014, 2017, 2018, 2019.
- 200 EXC: 2005-2016.
- 200 XC: 2005-2012.
- 250 SX: 2005-2022.
- 250 SXS: 2005-2007.
- 250 XC: 2007-2019.
- 250 EXC: 2005-2018.
- 300 EXC: 2005-2018.
- 300 XC: 2009-2018.
- 300 MXC: 2005.
* Please note that the application is valid only for engines that use carburetor. Not valid for fue injection engines.
Screenshots
User Rating
App is not rated in South Africa yet.
Ratings History
Jetting for KTM 2T Dirt Bikes Installs
Last 30 days
Jetting for KTM 2T Dirt Bikes Revenue
Last 30 daysJetting for KTM 2T Dirt Bikes Reviews
No Reviews in South Africa
App doesn't have any reviews in South Africa yet.
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
22
|
|
Top Paid
|
|
23
|
|
Top Paid
|
|
38
|
|
Top Paid
|
|
46
|
|
Top Paid
|
|
55
|
Keywords
Jetting for KTM 2T Dirt Bikes Competitors
| Name | Reviews | Recent release | |
|---|---|---|---|
Jetting for KTM 2T Moto
for MX, Enduro, Freeride Bikes
|
3
|
2 years ago | |
Jetting for Husqvarna 2T Moto
for TC, TX, TE, CR engines
|
1
|
2 years ago | |
Jetting for Beta 2T Moto
for Motocross, Enduro Bikes
|
0
|
1 year ago | |
Jetting for GasGas 2T Moto
for 125, 200 250 300cc engines
|
0
|
2 years ago | |
Jetting Kawasaki KX 2T Moto
for KX65, KX85, KX100, KX125
|
0
|
1 year ago | |
Jetting Yamaha YZ 2T Moto
for YZ65, YZ85, YZ125, YZ250
|
1
|
1 year ago | |
Jetting for Honda CRF 4T Moto
for 150R, 250R, 250X 450X 450R
|
0
|
2 years ago | |
Jetting for Cobra 2T Moto Dirt
for CX50 JR, CX50 SR, CX65
|
0
|
1 year ago | |
MX Buddy
The Motocross Racing Toolbox
|
0
|
1 month ago | |
Jetting Sherco 2T Moto Bikes
get optimal carburetor config
|
0
|
2 years ago |
Jetting for KTM 2T Dirt Bikes Revenue and Downloads
Gain valuable insights into Jetting for KTM 2T Dirt Bikes performance with our analytics.
Sign up now to access downloads, revenue, and more.
Sign up now to access downloads, revenue, and more.
App Info
- Category
- Sports
- Publisher
-
ISEnet
- Languages
- Portuguese, German, Catalan, Czech, Chinese, Korean, Danish, Slovak, Spanish, Finnish, French, Greek (modern), Hebrew (modern), Dutch, Hungarian, Indonesian, English, Italian, Japanese, Malay, Norwegian Bokmål, Polish, Romanian, Russian, Swedish, Thai, Turkish, Ukrainian, Vietnamese, Arabic
- Recent version
- 1.12 (1 year ago )
- Released on
- Mar 16, 2014 (10 years ago )
- Also available in
- United States, Netherlands, Portugal, Pakistan, Italy, Japan, South Korea, Kuwait, Kazakhstan, Lebanon, Mexico, Malaysia, Nigeria, Norway, New Zealand, Peru, Philippines, India, Poland, Romania, Russia, Saudi Arabia, Sweden, Singapore, Thailand, Turkey, Taiwan, Ukraine, Vietnam, South Africa, Denmark, Argentina, Austria, Australia, Azerbaijan, Belgium, Brazil, Belarus, Canada, Switzerland, Chile, China, Colombia, Czechia, Germany, United Arab Emirates, Dominican Republic, Algeria, Ecuador, Egypt, Spain, Finland, France, United Kingdom, Greece, Hong Kong, Hungary, Indonesia, Ireland, Israel
- Last updated
- 4 days ago