LaserPecker Design Space

I figured out how to get this to work even with the crappy reviews, and the laser did a nice job. With the update the app immediately says the etching is done even when it does nothing. I didn’t do the update on my IPad Pro and didn’t have any issues with the laser working. Is there anyone who knows how to program writing this app???!!!

The software limits the ability of the laser I do not recommend either. I have worked with this laser for over a year and a half, and it is less than adequate due to the software to work correctly

Pay 2k for a laser machine to have ads in the app

LP4 was much better and easier to connect to, LP5 cannot connected to my iPad no matter what I tried. I’m reconsidering this product. I recommend not to purchase the LP5 because of the issues that were facing.

Honestly whoever makes the laser pecker should be hung from a tree. What a garbage product

Do not work correctly for LP1. The basic app for it is outrageously bad.

Put in email and screen goes blank before you can hit “verify” Zero stars. What a waste.

The design functions are nice but, once the parameters are determined and fixed, there needs to be a de-featured app for repeat engravings, The ‘repeat’ function does not provide for a new preview prior to engraving which is essential for alignment of objects that vary in size and shape.

First, multiple slide extension takes multiple tries to upload to the laser. It will initially only load one file and you have re-upload it a couple of times in order for it to work, killing productivity. You can’t batch engrave anymore with this function either so if you try to load and engrave directly from the LP4 now, it will only do the first file in the group. Second, G-Code is misaligned to the preview. I’ve tried on multiple files, unplugged the machine etc. G-code that was once flawless, is now practically useless. Third, rotary dimensions are way off. I have to decrease by at least 7 millimeters in order to get close to a proper rotation. Fourth, the power and depth have been overall changed, this is inconvenient for those of us who learned the machine and need consistent production. This is unacceptable software for a ≈$2500 hardware.

It was OK at best. Then released 5.4.5 and it broke the rotary tool. Just rotates back and forth over 1 inch no matter what setting. Back and forth with “support” had to send video of issue. Replied thanks we see it and will release an update 7/25. Well that didn’t happen and it is still not functional. No ability to return it. Seeking relief from PayPal. Heard Lightburn is an alternative but paying more money to use a basic overpriced tool seems ridiculous. Basically useless, luckily I might be able to return the cases of water bottles I had purchased for an event that because of this failed software/device has since passed without the fun swag I was going to donate.