Echt jetzt … das geht gar nicht!
Die App stürzte bei fast jeden Start an. IMHO unbrauchbar. Hab das Bundle gekauft. Bitte Geld zurück!
RevMeter Pro
Published by:
Matthias Schorer
Description
RevMeter Pro measures the reverberation time of a room.
Burst and interrupted modes are supported. Because the dynamic range of the
iPhone microphone (30dB - 100dB) is too low to get 60dB dynamic RevMeter Pro supports only the RT30 and RT20 method.
RevMeter Pro also lets you send the measured results by eMail for later analysis. In addition screenshots
may be saved to the iPhoto album.
Definition of Reverberation Time:
The Reverberation Time RT60 is defined as the time required for reflections of a
direct sound to decay by 60 dB below the level of the direct sound. As it is usually very
difficult to achieve a dynamic range of 60dB two more methods have been established. They
are called RT30 and RT20. The measured time is the multiplied by 2, respectively 3 to
compute the RT60 time.
Measuring the reverberation time:
Historically reverberation time could only be measured using a level recorder
(a plotting device which graphs the noise level against time on a ribbon of moving paper).
A loud noise is produced, and as the sound dies away the trace on the level recorder will show a
distinct slope. Analysis of this slope reveals the measured reverberation time. Modern digital
sound level meters can carry out this analysis automatically.
Two basic methods exist for creating a sufficiently loud noise (which must have a defined cut off point).
Impulsive noise sources such as a blank pistol shot, or balloon burst may be used to measure the
impulse response of a room. Alternatively, a random noise signal such as pink noise or
white noise may be generated through a loudspeaker, and then turned off.
This is known as the interrupted method, and the measured result is known as the interrupted response.
Disclaimer:
Even though the RevMeter Pro Software has been calibrated using professional grade equipment, do no use RevMeter Pro
to carry out professional measurements. The author can not be held liable for any damage which might arise by using RevMeter Pro.
Hide
Show More...
Burst and interrupted modes are supported. Because the dynamic range of the
iPhone microphone (30dB - 100dB) is too low to get 60dB dynamic RevMeter Pro supports only the RT30 and RT20 method.
RevMeter Pro also lets you send the measured results by eMail for later analysis. In addition screenshots
may be saved to the iPhoto album.
Definition of Reverberation Time:
The Reverberation Time RT60 is defined as the time required for reflections of a
direct sound to decay by 60 dB below the level of the direct sound. As it is usually very
difficult to achieve a dynamic range of 60dB two more methods have been established. They
are called RT30 and RT20. The measured time is the multiplied by 2, respectively 3 to
compute the RT60 time.
Measuring the reverberation time:
Historically reverberation time could only be measured using a level recorder
(a plotting device which graphs the noise level against time on a ribbon of moving paper).
A loud noise is produced, and as the sound dies away the trace on the level recorder will show a
distinct slope. Analysis of this slope reveals the measured reverberation time. Modern digital
sound level meters can carry out this analysis automatically.
Two basic methods exist for creating a sufficiently loud noise (which must have a defined cut off point).
Impulsive noise sources such as a blank pistol shot, or balloon burst may be used to measure the
impulse response of a room. Alternatively, a random noise signal such as pink noise or
white noise may be generated through a loudspeaker, and then turned off.
This is known as the interrupted method, and the measured result is known as the interrupted response.
Disclaimer:
Even though the RevMeter Pro Software has been calibrated using professional grade equipment, do no use RevMeter Pro
to carry out professional measurements. The author can not be held liable for any damage which might arise by using RevMeter Pro.
Screenshots
RevMeter Pro FAQ
-
Is RevMeter Pro free?
Yes, RevMeter Pro is completely free and it doesn't have any in-app purchases or subscriptions.
-
Is RevMeter Pro legit?
⚠️ The RevMeter Pro app has poor ratings and negative feedback. Users seem unsatisfied with its performance or features.
Thanks for the vote -
How much does RevMeter Pro cost?
RevMeter Pro is free.
-
What is RevMeter Pro revenue?
To get estimated revenue of RevMeter Pro app and other AppStore insights you can sign up to AppTail Mobile Analytics Platform.
User Rating
App is not rated in Finland yet.
Ratings History
RevMeter Pro Reviews
Nicht kaufen!
Völlig unstabil, stürzt permanent ab oder lässt sich nicht öffnen, Audio Transport via SharePlay nicht machbar. Frech für so eine unausgereifte App Geld zu verlangen, Finger weg davon!!
Stürzt leider sehr oft ab.
Bevor ich zu einer Messung komme muss ich die App meist 5-6 mal starten.
Hilfreiche App(s)
Ich habe das ganze Bundle von Mess- und Ton Generator Apps. Und habe damit meine Raumakustik gut nachvollziehen und verbessern können. Bin natürlich kein Tontechniker. Aber wenn man bedenkt, dass man allein mit einem iPhone bewaffnet zu sehr aussagekräftigen Ergebnissen kommen kann: Hammer! Danke für die coolen Apps!
Nutzlos
Diese App kann fast nichts... Und kostet trotzdem viel? Denselben Funktionsumfang und mehr gibt es woanders kostenlos und besser.
nützliche App für besondere Anwendungen
Ich verwende diese App um den Erfolg von Schallschutzmaßnahmen an Schulen usw. den Benutzern zu verdeutlichen. Diese können in der Regel nur schwer beurteilen wie sehr sich eine Maßnahme ausgewirkt hat (oder wie gering unter Umständen). Ein Vorher-/Nachhervergleich ist da sehr hilfreich. Für eine einfache Messung ohne zusätzlichen Verstärker und Lautsprecher braucht man eine externe Schallquelle, zwei gleiche Luftballons die man jeweils platzen läßt erfüllen diesen Zweck. Bei Problemen ist der Autor sehr bemüht und hilfreich, habe ich selten so erlebt!
Schade
Funktioniert mit iPhone, berechnet jedoch eine falsche Nachhallzeit, viel zu niedrig!
iPad geht, aber iPhone geht nicht!
Es meldet stattdessen immer "zu geringer Dynamikumfang"- beide Geräte liegen nebeneinander und ich baller mit der Schreckschusspistole rum, daran kann es ja nun nicht liegen. Warum "nur iPhone" im Appshop-Text steht versteh einer- geht doch, allerdings nur die iPhone-Mickerauflösung. Die Ergebnisse schwanken bei 12 Aufnahmen unter exakt gleichen Bedingungen zwischen z.B. 967 und 1253ms- büschen arg viel. Aber zur Kompetenzunterstreichung macht die App was her!
Bitte auch fürs ipad machen!
Die Grafik ist gut verständlich, die Messung "über den Daumen" auch ok. Das hätte ich gerne auf dem ipad, damit man es größer sehen kann.
Schade
Die Vergleichsmessung einer Turnhalle (amtliche Messung einer Schallprüfstelle) ergab Unterschiede von über 1 Sekunde. Auch zur groben Abschätzung leider nicht zu gebrauchen.
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
46
|
|
Top Paid
|
|
217
|
|
Top Paid
|
|
271
|
|
Top Paid
|
|
284
|
|
Top Paid
|
|
301
|
RevMeter Pro Competitors
| Name | Downloads (30d) | Monthly Revenue | Reviews | Ratings | Recent release | |
|---|---|---|---|---|---|---|
ClapIR Acoustics Measurement
|
Unlock
|
Unlock
|
0
|
|
10 months ago | |
Spektroskop
|
Unlock
|
Unlock
|
1
|
|
2 years ago | |
Impulso
|
Unlock
|
Unlock
|
1
|
|
2 years ago | |
Impulso Pro
|
Unlock
|
Unlock
|
1
|
|
2 years ago | |
ClapReverb
Measure reverberation time
|
Unlock
|
Unlock
|
0
|
|
1 year ago | |
BuzziSpace RT60
Measure acoustics of a room
|
Unlock
|
Unlock
|
0
|
|
1 year ago | |
Fantoni Bluesound
Reverberation measurement.
|
Unlock
|
Unlock
|
0
|
|
2 years ago | |
Building Acoustics Partner
Measure building acoustics
|
Unlock
|
Unlock
|
0
|
|
3 weeks ago | |
Delay & Reverb Calculator
|
Unlock
|
Unlock
|
0
|
|
1 year ago | |
Building Acoustics Pro
|
Unlock
|
Unlock
|
0
|
|
2 weeks ago |
RevMeter Pro Installs
Last 30 days
RevMeter Pro Revenue
Last 30 daysRevMeter Pro Revenue and Downloads
Gain valuable insights into RevMeter Pro performance with our analytics.
Sign up now to access downloads, revenue, and more.
Sign up now to access downloads, revenue, and more.
App Info
- Category
- Utilities
- Publisher
- Matthias Schorer
- Languages
- English, German
- Recent release
- 4.1 (2 years ago )
- Released on
- Jul 23, 2011 (13 years ago )
- Also available in
- Germany , United States , Mexico , New Zealand , Denmark , Switzerland , Norway , United Kingdom , France , Poland , Spain , Indonesia , Canada , South Korea , Ukraine , Australia , Austria , Netherlands , Nigeria , Peru , Philippines , Malaysia , Romania , Pakistan , Portugal , India , Russia , Sweden , Singapore , Thailand , Türkiye , Taiwan , Vietnam , South Africa , Egypt , Argentina , Azerbaijan , Belgium , Brazil , Belarus , Chile , Colombia , Czechia , Dominican Republic , Algeria , Ecuador , Lebanon , Finland , Greece , Hungary , Ireland , Israel , United Arab Emirates , Italy , Japan , Kuwait , Kazakhstan
- Last Updated
- 1 week ago
This page includes copyrighted content from third parties, shared solely for commentary and research in accordance with fair use under applicable copyright laws. All trademarks, including product, service, and company names or logos, remain the property of their respective owners. Their use here falls under nominative fair use as outlined by trademark laws and does not suggest any affiliation with or endorsement by the trademark holders.