Akıllı Merdiven Aydınlatma

STEP TRACKING LADDER SYSTEM
Bluetooth, light sensor, speed and time adjustable, number of digits adjustable…
At the first start-up, the system tests the sensors, if there is no fault, if the sensor setting is correct, it automatically calibrates, checks the system leds from bottom to top, top to bottom, one by one, quickly turn on and off, 1 min. Then the sensors are activated. The number of digits is optionally generated 2-32+.
2 SENSORS FOR EACH DEVICE IS A GIFT
STUDY:
If the sensor detects movement, it lights up at a speed of 0.7 seconds from the nearest digit, after half the number of digits is burned in a second. The lighting continues. (Example: It stays on for 8 seconds for 16 digits.) It goes out from where it started with a speed of 0.8 seconds. If the lower and upper sensors detect movement at the same time, it starts burning from the bottom and the top, waits in the middle, darkens outwards from the middle and goes out softly. If the system detects movement again while it goes out, it stops the extinguishing and turns it on again in sequence from the detected place. All steps light up softly and go out.
FEATURES:
SPEED TIME ADJUSTMENT:
Burning rate 0.5 - 0.8 sec. Waiting time 3sec.- Number of presses sec. extinguishing speed 0.7-1 sec. user can adjust. It comes as a gift on all devices up to 19 digits.
AUTOMATIC FAULT NOTIFICATION AND SENSOR TEST:
It performs automatic sensor calibration at first boot. If there is a fault; The 1st digit for the lower sensor, the last digit for the upper sensor flash continuously, the relevant sensor connection is incorrect, the active stay time is open or broken. All devices have this feature. You can get more detailed information on our Youtube channel. https://www.youtube.com/channel/UC-FCBQznvf3ltx8-Fw157PQ
Optional add-ons:
It can be added to all devices.
LIGHTING MODULE: The brightness can be adjusted via the Light Module, if it is bright in the daytime (2 LEDs on the module), the system will never work.

BLUETOOTH MODULE: The speed of burning all digits from the phone is 0.5-1sec, the waiting time is 5-25sec. The extinguishing speed can be adjusted between 0.5-1.5 seconds by the user. All the outputs from the phone are on and off and there are many animations. You can download the mobile application for free from their market.
Example application: https://www.youtube.com/watch?v=hVqxGsIyTjc&t=2s
STEP SETTING:
It can be set manually from 2 digits to 17 digits.
OUR OTHER TYPES OF DEVICES:
Gold device:
Maximum 23A,100V, 10m 3 chips, maximum 40A per output, https://www.youtube.com/watch?v=_BVK-yPB4kQ
Professional device:
Maximum 8A,50V, 5m 3 chips, maximum 30A per output, https://www.youtube.com/watch?v=lhHByUIyAZQ
Power device:
Maximum 3A, 30V, 2m 3 chips, maximum 20A transformer can be used per output, https://www.youtube.com/shorts/DxU289ayTx8
Economic device:
Maximum 6W, 75cm 3 chips, maximum 8.5A transformer can be used per output, https://www.youtube.com/watch?v=3HMDwocKYnw
Device with relay:
Maximum 10A220V AC per output,
https://www.youtube.com/watch?v=QCaLX827K-Q
Communication:
Turkey Production Center: +905052973707
https://www.youtube.com/channel/UC-FCBQznvf3ltx8-Fw157PQ
https://www.instagram.com/stairs_aydinLAMA/
https://www.facebook.com/groups/1542781619214968
You can get detailed information by subscribing to our Youtube channel.