Horrible update
For some reason, anytime you save changes to a program, it automatically feeds to the max moisture content setting. So if my block is currently at 38% and my max is 45%, but my trigger is 25%. As soon as I save any new settings, it will run my pump til it’s back to 45% immediately. This wasn’t a problem before the update. If your max moisture content is set for 45% and roots are filling your Hugo as they are supposed to. And your new max moisture content is 44.9%, it will run your reservoir completely empty trying to get that extra 0.1%. There is ZERO safeties set in place. Like when within 1-2% of max moisture content set point, pump will only cycle twice and stop before draining your freshly changed 100 gal reservoir over night and flood your tables. This literally happened to me twice in one week because of 1% that changed over night Why not have set program buttons, so I can click it, run my pumps for a specific set time of my choosing and they turn off automatically? Instead I have to log in and manually turn the pump on, run a time and turn the pump off? Push a button, pump runs 30 seconds and shuts off, seems like a no brained to me.
