Updated settings
Can you update this app to include iame parilla 100, ka 100, rl 125. Please have it so we can option the different carbys to engines as well?
Jetting for IAME kart engines
Setup X30, Super X30 & Leopard
Veröffentlicht von:
Ingenieria del Software ISEnet S.L
Downloads
Umsatz
Beschreibung
This app provides, for the current weather conditions and a given engine configuration (engine model, gas, etc.), a jetting and exhaust length recommendation for IAME Parilla X30 Senior or Junior (Tillotson & Tryton carbs), X30 Super 175cc & Leopard engines.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next.
- Results: In this tab, a recommended jetting and exhaust length setup are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and exhaust length. Besides this information, the air density and density altitude are shown too. In addition, this tab lets do a fine tunning adjustment for the high and low needles to adapt to the concrete engine.
- Weather: In the second tab, called Weather, you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: You must set in this screen the information about the engine, that is, the engine type (Leopard, X30 Senior, X30 Junior X30 Super), carburetor, exhaust restrictions (for Junior engines), the oil mix ratio and the type of the circuit (short or long tracks). Depending of the track type, the jetting setups will be adapted.
- GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
Ausblenden
Mehr anzeigen...
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next.
- Results: In this tab, a recommended jetting and exhaust length setup are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and exhaust length. Besides this information, the air density and density altitude are shown too. In addition, this tab lets do a fine tunning adjustment for the high and low needles to adapt to the concrete engine.
- Weather: In the second tab, called Weather, you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: You must set in this screen the information about the engine, that is, the engine type (Leopard, X30 Senior, X30 Junior X30 Super), carburetor, exhaust restrictions (for Junior engines), the oil mix ratio and the type of the circuit (short or long tracks). Depending of the track type, the jetting setups will be adapted.
- GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
Screenshots
Jetting for IAME kart engines Häufige Fragen
-
Ist Jetting for IAME kart engines kostenlos?
Ja, Jetting for IAME kart engines ist komplett kostenlos und enthält keine In-App-Käufe oder Abonnements.
-
Ist Jetting for IAME kart engines seriös?
Nicht genügend Bewertungen, um eine zuverlässige Einschätzung vorzunehmen. Die App benötigt mehr Nutzerfeedback.
Danke für die Stimme -
Wie viel kostet Jetting for IAME kart engines?
Jetting for IAME kart engines ist kostenlos.
-
Wie hoch ist der Umsatz von Jetting for IAME kart engines?
Um geschätzte Einnahmen der Jetting for IAME kart engines-App und weitere AppStore-Einblicke zu erhalten, können Sie sich bei der AppTail Mobile Analytics Platform anmelden.
Benutzerbewertung
Die App ist in Australien noch nicht bewertet.
Bewertungsverlauf
Jetting for IAME kart engines Bewertungen
Store-Rankings
Ranking-Verlauf
App-Ranking-Verlauf noch nicht verfügbar
Kategorien-Rankings
|
Diagramm
|
Kategorie
|
Rang
|
|---|---|---|
|
Top Bezahlt
|
|
15
|
|
Top Bezahlt
|
|
17
|
|
Top Bezahlt
|
|
62
|
|
Top Bezahlt
|
|
76
|
|
Top Bezahlt
|
|
84
|
Jetting for IAME kart engines Konkurrenten
Jetting for IAME kart engines Installationen
Letzte 30 Tage
Jetting for IAME kart engines Umsatz
Letzte 30 TageJetting for IAME kart engines Einnahmen und Downloads
Gewinnen Sie wertvolle Einblicke in die Leistung von Jetting for IAME kart engines mit unserer Analytik.
Melden Sie sich jetzt an, um Zugriff auf Downloads, Einnahmen und mehr zu erhalten.
Melden Sie sich jetzt an, um Zugriff auf Downloads, Einnahmen und mehr zu erhalten.
App-Informationen
- Kategorie
- Sports
- Herausgeber
-
Ingenieria del Software ISEnet S.L
- Sprachen
- German, Arabic, Danish, English, Finnish, French, Greek (modern), Hebrew (modern), Indonesian, Italian, Japanese, Korean, Malay, Dutch, Norwegian Bokmål, Polish, Portuguese, Romanian, Swedish, Slovak, Spanish, Thai, Chinese, Czech, Turkish, Ukrainian, Hungarian, Vietnamese
- Letzte Veröffentlichung
- 1.7 (vor 1 Jahr )
- Veröffentlicht am
- Nov 10, 2015 (vor 9 Jahren )
- Auch verfügbar in
- Pakistan , Italien , Japan , Südkorea , Kuwait , Kasachstan , Libanon , Mexiko , Malaysia , Nigeria , Niederlande , Norwegen , Neuseeland , Peru , Philippinen , Indien , Polen , Portugal , Rumänien , Russland , Saudi-Arabien , Schweden , Singapur , Thailand , Türkei , Taiwan , Ukraine , Vereinigte Staaten , Vietnam , Südafrika , Dänemark , Argentinien , Österreich , Australien , Aserbaidschan , Belgien , Brasilien , Belarus , Kanada , Schweiz , Chile , China , Kolumbien , Tschechien , Deutschland , Vereinigte Arabische Emirate , Dominikanische Republik , Algerien , Ecuador , Ägypten , Spanien , Finnland , Frankreich , Vereinigtes Königreich , Griechenland , Sonderverwaltungsregion Hongkong , Ungarn , Indonesien , Irland , Israel
- Zuletzt aktualisiert
- vor 1 Woche
This page includes copyrighted content from third parties, shared solely for commentary and research in accordance with fair use under applicable copyright laws. All trademarks, including product, service, and company names or logos, remain the property of their respective owners. Their use here falls under nominative fair use as outlined by trademark laws and does not suggest any affiliation with or endorsement by the trademark holders.
- © 2024 AppTail.
- Unterstützung
- Privacy
- Terms
- All Apps