Recommend
Our team get perfect results with this app. Recommend!
Jetting Vortex OK & OK-Junior
get best carburetor config
Veröffentlicht von:
BALLISTIC SOLUTIONS RESEARCH & DEVELOPMENT SOFTWARE SIARHEI RAICHONAK
Downloads
Umsatz
Beschreibung
This app provides, using temperature, altitude, humidity, atmospheric pressure and your engine configuration, a recommendation about optimal carburetor config (jetting) for karts with Vortex OK & OK-Junior engines (DJT, DDJ, DST, DDS models) which use a Tillotson diaphragm carburetors
Valid for the following Vortex engine models:
• DJT (Tillotson HC-114a, HC-116a, HW-43a, HW-43-CNC carburetor)
• DDJ (Tillotson HC-114a, HC-116a, HW-43a, HW-43-CNC carburetor)
• DST (Tillotson HC-115a, HC-117a, HW-112a carburetor)
• DDS (Tillotson HC-115a, HC-117a, HW-112a carburetor)
This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station through the internet. Internal barometer is used on supported devices for better precision. Application can run without GPS, WiFi and internet, in this case the user has to enter weather data manually.
• For each carburetor configuration, the following values are given: high speed screw position, low speed screw position, pop-off pressure, gasket & membrane reccomendation, spark plug, optimal exhaust temperature (EGT)
• Fine tuning for high and low speed screws
• History of all your carburetor configs
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Selectable fuel type (gasoline with or without ethanol, Racing fuels available, for example: VP Racing, Sunoco, Panta Kart Ron 102)
• Adjustable fuel/oil ratio
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Possibility of use automatic weather data or a portable weather station
• If you don't want to share your location, you can manually select any place in the world, the carburetor config will be adapted for this place
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg for pressures
The application contains four tabs, which are described next:
• Results: In this tab high speed screw position, low speed screw position, pop-off pressure, gasket & membrane reccomendation, spark plug, optimal exhaust temperature (EGT) are shown. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs. This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine. Also the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too. On this tab, you can also share your settings with your colleagues. You can also see in a graphic form the calculated ratio of air and fuel (lambda).
• History: This tab contains the history of all carburetor configs. This tab also contains your favorite carburetor configs.
• Engine: You can configure in this screen the information about the engine, that is, engine model, model of carburetor, spark manufacturer, fuel type, oil mix ratio
• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity). In addition, this application can work with a pressure sensor built into the iPhone. You can see if it is available on your device and turn it on or off. Also, on this tab, you can enable alerts about possible carburetor icing.
If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software. We are also users of this application.
Ausblenden
Mehr anzeigen...
Valid for the following Vortex engine models:
• DJT (Tillotson HC-114a, HC-116a, HW-43a, HW-43-CNC carburetor)
• DDJ (Tillotson HC-114a, HC-116a, HW-43a, HW-43-CNC carburetor)
• DST (Tillotson HC-115a, HC-117a, HW-112a carburetor)
• DDS (Tillotson HC-115a, HC-117a, HW-112a carburetor)
This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station through the internet. Internal barometer is used on supported devices for better precision. Application can run without GPS, WiFi and internet, in this case the user has to enter weather data manually.
• For each carburetor configuration, the following values are given: high speed screw position, low speed screw position, pop-off pressure, gasket & membrane reccomendation, spark plug, optimal exhaust temperature (EGT)
• Fine tuning for high and low speed screws
• History of all your carburetor configs
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Selectable fuel type (gasoline with or without ethanol, Racing fuels available, for example: VP Racing, Sunoco, Panta Kart Ron 102)
• Adjustable fuel/oil ratio
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Possibility of use automatic weather data or a portable weather station
• If you don't want to share your location, you can manually select any place in the world, the carburetor config will be adapted for this place
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg for pressures
The application contains four tabs, which are described next:
• Results: In this tab high speed screw position, low speed screw position, pop-off pressure, gasket & membrane reccomendation, spark plug, optimal exhaust temperature (EGT) are shown. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs. This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine. Also the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too. On this tab, you can also share your settings with your colleagues. You can also see in a graphic form the calculated ratio of air and fuel (lambda).
• History: This tab contains the history of all carburetor configs. This tab also contains your favorite carburetor configs.
• Engine: You can configure in this screen the information about the engine, that is, engine model, model of carburetor, spark manufacturer, fuel type, oil mix ratio
• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity). In addition, this application can work with a pressure sensor built into the iPhone. You can see if it is available on your device and turn it on or off. Also, on this tab, you can enable alerts about possible carburetor icing.
If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software. We are also users of this application.
Screenshots
Jetting Vortex OK & OK Häufige Fragen
-
Ist Jetting Vortex OK & OK kostenlos?
Ja, Jetting Vortex OK & OK ist komplett kostenlos und enthält keine In-App-Käufe oder Abonnements.
-
Ist Jetting Vortex OK & OK seriös?
Nicht genügend Bewertungen, um eine zuverlässige Einschätzung vorzunehmen. Die App benötigt mehr Nutzerfeedback.
Danke für die Stimme -
Wie viel kostet Jetting Vortex OK & OK?
Jetting Vortex OK & OK ist kostenlos.
-
Wie hoch ist der Umsatz von Jetting Vortex OK & OK?
Um geschätzte Einnahmen der Jetting Vortex OK & OK-App und weitere AppStore-Einblicke zu erhalten, können Sie sich bei der AppTail Mobile Analytics Platform anmelden.
Benutzerbewertung
Die App ist in Taiwan noch nicht bewertet.
Bewertungsverlauf
Jetting Vortex OK & OK Bewertungen
Store-Rankings
Ranking-Verlauf
App-Ranking-Verlauf noch nicht verfügbar
Kategorien-Rankings
|
Diagramm
|
Kategorie
|
Rang
|
|---|---|---|
|
Top Bezahlt
|
|
157
|
|
Top Bezahlt
|
|
189
|
|
Top Bezahlt
|
|
379
|
|
Top Bezahlt
|
|
391
|
|
Top Bezahlt
|
|
395
|
Schlüsselwörter
Jetting Vortex OK & OK Konkurrenten
| Name | Downloads (30d) | Monatlicher Umsatz | Rezensionen | Bewertungen | Letzte Veröffentlichung | |
|---|---|---|---|---|---|---|
Jetting TM Kart for KZ / ICC
KZ-R1, all KZ10 & K9 engines
|
Freischalten
|
Freischalten
|
0
|
|
vor 1 Jahr | |
Jetting for DellOrto VHSH PRO
The most complete jetting app
|
Freischalten
|
Freischalten
|
0
|
|
vor 9 Monaten | |
FIA Karting
|
Freischalten
|
Freischalten
|
0
|
|
vor 1 Jahr | |
Kart Chassis Setup Premium
The original & most advanced
|
Freischalten
|
Freischalten
|
0
|
|
vor 1 Jahr | |
Jetting for IAME kart engines
Setup X30, Super X30 & Leopard
|
Freischalten
|
Freischalten
|
0
|
|
vor 1 Jahr | |
ALFANO Tyrecontrol 2
|
Freischalten
|
Freischalten
|
0
|
|
vor 2 Jahren | |
Unipro ApS
Connect with Unipro device
|
Freischalten
|
Freischalten
|
0
|
|
vor 1 Jahr | |
化油器的的Rotax Max EVO
所有類別和年份
|
Freischalten
|
Freischalten
|
0
|
|
vor 9 Monaten | |
SetKART
|
Freischalten
|
Freischalten
|
0
|
|
vor 2 Jahren | |
Jetting for Vortex KZ Kart
Max Performance for your kart
|
Freischalten
|
Freischalten
|
0
|
|
vor 1 Jahr |
Jetting Vortex OK & OK Installationen
Letzte 30 Tage
Jetting Vortex OK & OK Umsatz
Letzte 30 TageJetting Vortex OK & OK Einnahmen und Downloads
Gewinnen Sie wertvolle Einblicke in die Leistung von Jetting Vortex OK & OK mit unserer Analytik.
Melden Sie sich jetzt an, um Zugriff auf Downloads, Einnahmen und mehr zu erhalten.
Melden Sie sich jetzt an, um Zugriff auf Downloads, Einnahmen und mehr zu erhalten.
App-Informationen
- Kategorie
- Sports
- Sprachen
- Arabic, Catalan, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Greek (modern), Hebrew (modern), Hungarian, Indonesian, Italian, Japanese, Korean, Malay, Norwegian Bokmål, Polish, Portuguese, Romanian, Russian, Chinese, Slovak, Spanish, Swedish, Thai, Chinese, Turkish, Ukrainian, Vietnamese
- Letzte Veröffentlichung
- 1.6 (vor 3 Jahren )
- Veröffentlicht am
- Oct 2, 2020 (vor 4 Jahren )
- Auch verfügbar in
- Vereinigtes Königreich , Frankreich , Österreich , Australien , Vereinigte Staaten , Italien , Dänemark , Deutschland , China , Norwegen , Niederlande , Philippinen , Peru , Neuseeland , Rumänien , Nigeria , Malaysia , Mexiko , Libanon , Kasachstan , Pakistan , Polen , Portugal , Indien , Russland , Saudi-Arabien , Schweden , Singapur , Thailand , Türkei , Taiwan , Ukraine , Vietnam , Südafrika , Ecuador , Argentinien , Aserbaidschan , Belgien , Brasilien , Belarus , Kanada , Schweiz , Chile , Kolumbien , Tschechien , Dominikanische Republik , Algerien , Kuwait , Ägypten , Finnland , Griechenland , Sonderverwaltungsregion Hongkong , Ungarn , Indonesien , Irland , Israel , Vereinigte Arabische Emirate , Japan , Südkorea
- Zuletzt aktualisiert
- vor 4 Tagen
This page includes copyrighted content from third parties, shared solely for commentary and research in accordance with fair use under applicable copyright laws. All trademarks, including product, service, and company names or logos, remain the property of their respective owners. Their use here falls under nominative fair use as outlined by trademark laws and does not suggest any affiliation with or endorsement by the trademark holders.
- © 2024 AppTail.
- Unterstützung
- Privacy
- Terms
- All Apps