Tilt2 not found
Does not find Tilt2
Beschreibung
MyBrewbot was launched 2018 and already has more than 300 users across the World.
Our aim was to create an Internet enabled temperature controller that didn't rely on wiring relays or complex setup in order to get going. The controller communicates with readily available 433mhz remote control plugs to switch heating and cooling sources on and off.
The controller has a Bluetooth module that communicates with Tilt hydrometers and can use the temperature and SG data from the Tilt to control the fermentation process.
The controller also connects to iSpindel data sources for control.
Data logging is enabled for Ubidots and BrewFather and the controller app also has data logging capability. Further data links will be established with other brewing applications as they release their APIs.
The PSI jack is used to connect to a standard 5V DC Pressure Transducer Sensor which should be screwed into your spunding valve apparatus.
The controller has a wealth of features all of which are accessible through the free app available on iOS App Store. Key features are:
1. Monitoring in both Centigrade and Fahrenheit.
2. Control for up to two fermentation chambers
3. 15 step profiles for each fermentation chamber including time over temperature, temperature over time, free rise and specific gravity triggers
4. User defined alarms to warn of excessive heating or cooling
5. User defined hysteresis settings
6. A 'slow ramp' setting which uses an ambient temperature sensor to gently raise or lower the temperature
7. Online storage of up to 5 profiles.
8. If you don't have a Tilt or ISpindel then by using two probes in each fermentation chamber (one for beer and one for ambient temperature) the controller will use thermodynamics to estimate the Specific Gravity of your beer based on the heat generated by the yeast as they consume glucose.
Ausblenden
Mehr anzeigen...
Our aim was to create an Internet enabled temperature controller that didn't rely on wiring relays or complex setup in order to get going. The controller communicates with readily available 433mhz remote control plugs to switch heating and cooling sources on and off.
The controller has a Bluetooth module that communicates with Tilt hydrometers and can use the temperature and SG data from the Tilt to control the fermentation process.
The controller also connects to iSpindel data sources for control.
Data logging is enabled for Ubidots and BrewFather and the controller app also has data logging capability. Further data links will be established with other brewing applications as they release their APIs.
The PSI jack is used to connect to a standard 5V DC Pressure Transducer Sensor which should be screwed into your spunding valve apparatus.
The controller has a wealth of features all of which are accessible through the free app available on iOS App Store. Key features are:
1. Monitoring in both Centigrade and Fahrenheit.
2. Control for up to two fermentation chambers
3. 15 step profiles for each fermentation chamber including time over temperature, temperature over time, free rise and specific gravity triggers
4. User defined alarms to warn of excessive heating or cooling
5. User defined hysteresis settings
6. A 'slow ramp' setting which uses an ambient temperature sensor to gently raise or lower the temperature
7. Online storage of up to 5 profiles.
8. If you don't have a Tilt or ISpindel then by using two probes in each fermentation chamber (one for beer and one for ambient temperature) the controller will use thermodynamics to estimate the Specific Gravity of your beer based on the heat generated by the yeast as they consume glucose.
Screenshots
MyBrewbot II Häufige Fragen
-
Ist MyBrewbot II kostenlos?
Ja, MyBrewbot II ist komplett kostenlos und enthält keine In-App-Käufe oder Abonnements.
-
Ist MyBrewbot II seriös?
Nicht genügend Bewertungen, um eine zuverlässige Einschätzung vorzunehmen. Die App benötigt mehr Nutzerfeedback.
Danke für die Stimme -
Wie viel kostet MyBrewbot II?
MyBrewbot II ist kostenlos.
-
Wie hoch ist der Umsatz von MyBrewbot II?
Um geschätzte Einnahmen der MyBrewbot II-App und weitere AppStore-Einblicke zu erhalten, können Sie sich bei der AppTail Mobile Analytics Platform anmelden.
Benutzerbewertung
Die App ist in Kanada noch nicht bewertet.
Bewertungsverlauf
MyBrewbot II Bewertungen
Store-Rankings
Ranking-Verlauf
App-Ranking-Verlauf noch nicht verfügbar
Kategorien-Rankings
App ist noch nicht gerankt
MyBrewbot II Installationen
Letzte 30 Tage
MyBrewbot II Umsatz
Letzte 30 TageMyBrewbot II Einnahmen und Downloads
Gewinnen Sie wertvolle Einblicke in die Leistung von MyBrewbot II mit unserer Analytik.
Melden Sie sich jetzt an, um Zugriff auf Downloads, Einnahmen und mehr zu erhalten.
Melden Sie sich jetzt an, um Zugriff auf Downloads, Einnahmen und mehr zu erhalten.
App-Informationen
- Kategorie
- Food Drink
- Herausgeber
- Blynk Technologies
- Sprachen
- English
- Letzte Veröffentlichung
- 1.0 (vor 5 Jahren )
- Veröffentlicht am
- Mar 25, 2019 (vor 5 Jahren )
- Auch verfügbar in
- Australien, Vereinigtes Königreich, Südafrika, Vereinigte Arabische Emirate, Vietnam, Usbekistan, Vereinigte Staaten, Thailand, Slowenien, Schweden, Portugal, Norwegen, Mexiko, Japan, Italien, Indonesien, Frankreich, Finnland, Spanien, Ägypten, Algerien, China, Kanada, Belarus, Belgien
- Zuletzt aktualisiert
- vor 2 Wochen
This page includes copyrighted content from third parties, shared solely for commentary and research in accordance with fair use under applicable copyright laws. All trademarks, including product, service, and company names or logos, remain the property of their respective owners. Their use here falls under nominative fair use as outlined by trademark laws and does not suggest any affiliation with or endorsement by the trademark holders.
- © 2025 AppTail.
- Unterstützung
- Privacy
- Terms
- All Apps