Turning Cut Calculator II

Manage your turning data

Veröffentlicht von: Kent Johansson

Beschreibung

MAIN PROPERTIES
- Calculates the time for a lathe cut by using given cutting data
- Calculation of input data also gives values for surface finish, material removal, chip thicknesses, cutting forces, torque and power
- Possible process-data that can be changed are diameter, cutting length, cutting speed, spindle speed, feed per revolution, feed per minute, tip radius, surface fineness, processing type, cutting depth, entering angle, rake angle, material, specific cutting force (kc) and efficiency
- Handles both of the systems Metric and Imperial
- Possible to convert between these two systems
- Converts between cutting speed and spindle speed
- Converts between feed per revolution and feed per minute
- Calculates an approximate surface quality from given tip radius and feed
- Calculates an approximate feed from given tip radius and surface quality
- Calculates material removal and material removal rate
- Calculates maximum and average (equivalent) chip thicknesses
- Obtain a good "Specific Cutting Force" via material selection
- Calculates approximate cutting forces
- Calculates approximate torque and power
- Almost all values can be changed by entering absolute value or with buttons for step change
- Required updates of affected values occur immediately
- Switching between change methods is made by a long tap on the value's row
- Possibility to get a short explanation about a value with a fast double tap on the value's row
- Possibility to get explanations of other result values with a quick double-tap in the specific result area
- Ability to select time for viewing highlighted text and active buttons
- Ability to select color theme
- Ability to adjust color tones for the color themes
- Possible to select main font
- Possibility to change the appearance of highlighted sub-values
- Possible to create new default values
- All settings are stored for the next use of the app
- Possible to continue with the last session when starting the app

HANDLING IN BRIEF
At the start of the app, all properties have a value. These values can be selected as fixed basic values or saved values from the previous session. To change a value, first tap on the property's field to enable the property. Upon activation, the field lights up in a preset bright color. At the bottom of the screen, a keypad for input of the same color lights up. The keypad can be chosen to be for absolute or for incremental input of values and is adapted to current property. Switching between the different keypads is done with a long tap on a value field.
In conjunction with activation of a property, in most cases, some other value fields are also lit in a darker color to indicate that their values will also change.
With a quick double tap on a value's field a brief description and a descriptive image of current property can be obtained. The same thing happens when you double tap the result field on page 2, but all results are described in a scrollable image.

Page 1 is used for input and calculation of cutting data, surface fineness and cutting time. Page 1 manages itself and is NOT DEPENDENT on page 2.
Page 2, on the other hand, is dependent on page 1 and is used for further data entry and calculations.

TREATED VALUES ON PAGE 1
- Diameter
- Cutting length
- Cutting speed
- Spindle speed
- Feed per revolution
- Feed per minute
- Tip radius
- Surface
- Time

INPUT VALUES ON PAGE 2
- Processing type
- Cutting depth
- Entering angle
- Specific cutting force (kc)
· Material
· Rake angle
- Efficiency

RESULTING VALUES ON PAGE 2
- Material removal (volume and rate)
- Chip thicknesses (max and average (equivalent))
- Cutting forces (tangential, axial and radial)
- Torque (spindle)
- Power (spindle and motor)
Ausblenden Mehr anzeigen...

Screenshots

Turning Cut Calculator II Häufige Fragen

  • Ist Turning Cut Calculator II kostenlos?

    Turning Cut Calculator II ist nicht kostenlos (es kostet 4900.00), enthält jedoch keine In-App-Käufe oder Abonnements.

  • Ist Turning Cut Calculator II seriös?

    Nicht genügend Bewertungen, um eine zuverlässige Einschätzung vorzunehmen. Die App benötigt mehr Nutzerfeedback.

    Danke für die Stimme

  • Wie viel kostet Turning Cut Calculator II?

    Der Preis von Turning Cut Calculator II beträgt 4900.00.

  • Wie hoch ist der Umsatz von Turning Cut Calculator II?

    Um geschätzte Einnahmen der Turning Cut Calculator II-App und weitere AppStore-Einblicke zu erhalten, können Sie sich bei der AppTail Mobile Analytics Platform anmelden.

Benutzerbewertung
Die App ist in Kolumbien noch nicht bewertet.
Bewertungsverlauf

Turning Cut Calculator II Bewertungen

Keine Bewertungen in Kolumbien
Die App hat noch keine Bewertungen in Kolumbien.

Store-Rankings

Ranking-Verlauf
App-Ranking-Verlauf noch nicht verfügbar
Kategorien-Rankings
Diagramm
Kategorie
Rang
Top Bezahlt
430
Top Bezahlt
444

Turning Cut Calculator II Installationen

Letzte 30 Tage

Turning Cut Calculator II Umsatz

Letzte 30 Tage

Turning Cut Calculator II Einnahmen und Downloads

Gewinnen Sie wertvolle Einblicke in die Leistung von Turning Cut Calculator II mit unserer Analytik.
Melden Sie sich jetzt an, um Zugriff auf Downloads, Einnahmen und mehr zu erhalten.
This page includes copyrighted content from third parties, shared solely for commentary and research in accordance with fair use under applicable copyright laws. All trademarks, including product, service, and company names or logos, remain the property of their respective owners. Their use here falls under nominative fair use as outlined by trademark laws and does not suggest any affiliation with or endorsement by the trademark holders.