Wingman Aircraft Instruments

The software and the hardware is designed to help Ultralight trike, fixed wing, paratrike, Kit builders, and home aircraft builders to find low cost solution for basic flight instrumentation.
The software is FREE but it application requires to purchase of Flybox Central panel and sensors from Sky Laboratories Ltd. This application is not only a GPS or G sensor based application but taking real data from the Flybox central panel such as :The EFIS can handle 2 or 4 stroke engines and basic flight instrument as follows:
- Airspeed (pitot)
- Altitude (Barometric)
- Vertical speed (calculated from barometric altitude change)
- Engine RPM
- Oil Pressure
- 2 CHT
- 2 EGT
- Oil and Water temperature
- Fuel computer
- Battery voltage
- Total flight hours
Warning !
This is not a certified aircraft instrument, you use it at your own risk. This electronics were designed for experimental or homebuilt market. You must be prepared to fly your aircraft at any time without instruments if you dont have a secondary unit. Make sure you are prepared for full visual piloting even loss of all indication either from flight avionics or engine instruments. Failure of this instrument will not effect engine run, or flight characteristic of your aircraft. The manufacturer does not accept any sort of damage or claim happened from failure of the electronics.
By downloading and using this software you agree with these limitations.
App requires a tablet with built in :
e-compass !
GPS, Glonas
gyroscop
Bluetooth
The app DOES NOT WORK without Sky Laboratories Ltd EFIS Electronics, it requires Bluetooth connection with the EFIS device.
Sky Laboratories Ltd manufactures 3 different electronics for this app:
- 1 cylinder engine
- 2 cylinder engines
- 4 to 6 cylinder engines with autogyro special features
The type of electronics is selectable in the app.
Sample installation video of a 2 cylinder engine trike is here: https://www.youtube.com/watch?v=wckqGRZkLLI
More information about electronics and prices please contact [email protected]