Recommend
Our team get perfect results with this app. Recommend!
Описание
This app provides, using temperature, altitude, humidity, atmospheric pressure and your engine configuration, a recommendation about optimal carburetor config (jetting) for karts with Vortex OK & OK-Junior engines (DJT, DDJ, DST, DDS models) which use a Tillotson diaphragm carburetors
Valid for the following Vortex engine models:
• DJT (Tillotson HC-114a, HC-116a, HW-43a, HW-43-CNC carburetor)
• DDJ (Tillotson HC-114a, HC-116a, HW-43a, HW-43-CNC carburetor)
• DST (Tillotson HC-115a, HC-117a, HW-112a carburetor)
• DDS (Tillotson HC-115a, HC-117a, HW-112a carburetor)
This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station through the internet. Internal barometer is used on supported devices for better precision. Application can run without GPS, WiFi and internet, in this case the user has to enter weather data manually.
• For each carburetor configuration, the following values are given: high speed screw position, low speed screw position, pop-off pressure, gasket & membrane reccomendation, spark plug, optimal exhaust temperature (EGT)
• Fine tuning for high and low speed screws
• History of all your carburetor configs
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Selectable fuel type (gasoline with or without ethanol, Racing fuels available, for example: VP Racing, Sunoco, Panta Kart Ron 102)
• Adjustable fuel/oil ratio
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Possibility of use automatic weather data or a portable weather station
• If you don't want to share your location, you can manually select any place in the world, the carburetor config will be adapted for this place
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg for pressures
The application contains four tabs, which are described next:
• Results: In this tab high speed screw position, low speed screw position, pop-off pressure, gasket & membrane reccomendation, spark plug, optimal exhaust temperature (EGT) are shown. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs. This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine. Also the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too. On this tab, you can also share your settings with your colleagues. You can also see in a graphic form the calculated ratio of air and fuel (lambda).
• History: This tab contains the history of all carburetor configs. This tab also contains your favorite carburetor configs.
• Engine: You can configure in this screen the information about the engine, that is, engine model, model of carburetor, spark manufacturer, fuel type, oil mix ratio
• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity). In addition, this application can work with a pressure sensor built into the iPhone. You can see if it is available on your device and turn it on or off. Also, on this tab, you can enable alerts about possible carburetor icing.
If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software. We are also users of this application.
Скрыть
Показать больше...
Valid for the following Vortex engine models:
• DJT (Tillotson HC-114a, HC-116a, HW-43a, HW-43-CNC carburetor)
• DDJ (Tillotson HC-114a, HC-116a, HW-43a, HW-43-CNC carburetor)
• DST (Tillotson HC-115a, HC-117a, HW-112a carburetor)
• DDS (Tillotson HC-115a, HC-117a, HW-112a carburetor)
This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station through the internet. Internal barometer is used on supported devices for better precision. Application can run without GPS, WiFi and internet, in this case the user has to enter weather data manually.
• For each carburetor configuration, the following values are given: high speed screw position, low speed screw position, pop-off pressure, gasket & membrane reccomendation, spark plug, optimal exhaust temperature (EGT)
• Fine tuning for high and low speed screws
• History of all your carburetor configs
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Selectable fuel type (gasoline with or without ethanol, Racing fuels available, for example: VP Racing, Sunoco, Panta Kart Ron 102)
• Adjustable fuel/oil ratio
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Possibility of use automatic weather data or a portable weather station
• If you don't want to share your location, you can manually select any place in the world, the carburetor config will be adapted for this place
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg for pressures
The application contains four tabs, which are described next:
• Results: In this tab high speed screw position, low speed screw position, pop-off pressure, gasket & membrane reccomendation, spark plug, optimal exhaust temperature (EGT) are shown. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs. This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine. Also the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too. On this tab, you can also share your settings with your colleagues. You can also see in a graphic form the calculated ratio of air and fuel (lambda).
• History: This tab contains the history of all carburetor configs. This tab also contains your favorite carburetor configs.
• Engine: You can configure in this screen the information about the engine, that is, engine model, model of carburetor, spark manufacturer, fuel type, oil mix ratio
• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity). In addition, this application can work with a pressure sensor built into the iPhone. You can see if it is available on your device and turn it on or off. Also, on this tab, you can enable alerts about possible carburetor icing.
If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software. We are also users of this application.
Скриншоты
Jetting Vortex OK & OK Частые Вопросы
-
Приложение Jetting Vortex OK & OK бесплатное?
Да, Jetting Vortex OK & OK полностью бесплатное и не содержит встроенных покупок или подписок.
-
Является ли Jetting Vortex OK & OK фейковым или мошенническим?
Недостаточно отзывов для надежной оценки. Приложению нужно больше отзывов пользователей.
Спасибо за ваш голос -
Сколько стоит Jetting Vortex OK & OK?
Приложение Jetting Vortex OK & OK бесплатное.
-
Сколько зарабатывает Jetting Vortex OK & OK?
Чтобы получить оценку дохода приложения Jetting Vortex OK & OK и другие данные AppStore, вы можете зарегистрироваться на платформе мобильной аналитики AppTail.
Оценки пользователей
Приложение еще не оценено в Япония.
История оценок
Jetting Vortex OK & OK Отзывы Пользователей
Оценки
История позиций в топах
История рейтингов пока не доступна
Позиции в категории
|
Рейтинг
|
Категория
|
Позиция
|
|---|---|---|
|
Топ платных
|
|
157
|
|
Топ платных
|
|
189
|
|
Топ платных
|
|
379
|
|
Топ платных
|
|
391
|
|
Топ платных
|
|
395
|
Ключевые слова
Jetting Vortex OK & OK Конкуренты
| Name | Скачивания (30d) | Ежемесячный доход | Отзывы | Оценки | Последнее обновление | |
|---|---|---|---|---|---|---|
Jetting TM Kart for KZ / ICC
KZ-R1, all KZ10 & K9 engines
|
Открыть
|
Открыть
|
0
|
|
1 год назад | |
Jetting for DellOrto VHSH PRO
The most complete jetting app
|
Открыть
|
Открыть
|
0
|
|
9 месяцев назад | |
FIA Karting
|
Открыть
|
Открыть
|
0
|
|
1 год назад | |
Rotax MAX Jetting
Carburetor Mainjet Setup
|
Открыть
|
Открыть
|
0
|
|
8 месяцев назад | |
Kart Chassis Setup Premium
The original & most advanced
|
Открыть
|
Открыть
|
0
|
|
1 год назад | |
Jetting for IAME kart engines
Setup X30, Super X30 & Leopard
|
Открыть
|
Открыть
|
0
|
|
1 год назад | |
ALFANO Tyrecontrol 2
|
Открыть
|
Открыть
|
0
|
|
2 года назад | |
Unipro ApS
Connect with Unipro device
|
Открыть
|
Открыть
|
0
|
|
1 год назад | |
Jetting for Rotax Max EVO Kart
All categories and years
|
Открыть
|
Открыть
|
0
|
|
9 месяцев назад | |
Jetting for Vortex KZ Kart
Max Performance for your kart
|
Открыть
|
Открыть
|
0
|
|
1 год назад |
Jetting Vortex OK & OK Установки
30дн.
Jetting Vortex OK & OK Доход
30дн.Jetting Vortex OK & OK Доходы и Загрузки
Получите ценные инсайты о производительности Jetting Vortex OK & OK с помощью нашей аналитики.
Зарегистрируйтесь сейчас, чтобы получить доступ к статистика загрузок и доходов и многому другому.
Зарегистрируйтесь сейчас, чтобы получить доступ к статистика загрузок и доходов и многому другому.
Информация о приложении
- Категория
- Sports
- Разработчик
-
Ballistic Solutions
- Языки
- Arabic, Catalan, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Greek (modern), Hebrew (modern), Hungarian, Indonesian, Italian, Japanese, Korean, Malay, Norwegian Bokmål, Polish, Portuguese, Romanian, Russian, Chinese, Slovak, Spanish, Swedish, Thai, Chinese, Turkish, Ukrainian, Vietnamese
- Последнее обновление
- 1.6 (3 года назад )
- Выпущено
- Oct 2, 2020 (4 года назад )
- Также доступно в
- Великобритания , Франция , Австрия , Австралия , Соединенные Штаты , Италия , Дания , Германия , Китай , Норвегия , Нидерланды , Филиппины , Перу , Новая Зеландия , Румыния , Нигерия , Малайзия , Мексика , Ливан , Казахстан , Пакистан , Польша , Португалия , Индия , Россия , Саудовская Аравия , Швеция , Сингапур , Таиланд , Турция , Тайвань , Украина , Вьетнам , Южно-Африканская Республика , Эквадор , Аргентина , Азербайджан , Бельгия , Бразилия , Беларусь , Канада , Швейцария , Чили , Колумбия , Чехия , Доминиканская Республика , Алжир , Кувейт , Египет , Финляндия , Греция , Гонконг (САР) , Венгрия , Индонезия , Ирландия , Израиль , ОАЭ , Япония , Республика Корея
- Обновлено
- 4 дня назад
This page includes copyrighted content from third parties, shared solely for commentary and research in accordance with fair use under applicable copyright laws. All trademarks, including product, service, and company names or logos, remain the property of their respective owners. Their use here falls under nominative fair use as outlined by trademark laws and does not suggest any affiliation with or endorsement by the trademark holders.
AppTail.