BeatMaker 3
The music production studio
#1 Keyword Rankings
Today
Top 10 Rankings
Today
Top 30 Rankings
Today
Top 100 Rankings
Today

Description

▸ REDEFINING MUSIC PRODUCTION

BeatMaker brings unmatched efficiency and depth in an intuitive audio and MIDI workstation.
Look no further, the power of traditional desktop software and real hardware is now united into one single production studio.


▸ PLAY • PERFORM • RECORD

Its streamlined workflow lets you perform and shape your ideas quickly and effectively, turning your instruments into full productions. Inspirational performance tools such as repeat, roll, swing, key scales & chords and macro controls will boost your creativity tenfold.
Take control of it all with your MIDI gear and the new smart binding system.


▸ CRAFT YOUR OWN INSTRUMENTS

128 banks of 128 pads, where each one of them is a full-fledged instrument with multiple dimensions.

Record and chop live, assemble, mangle and resample: our state of the art sampling engine will sculpt your ideas, giving life to your instruments with a full modulation and layering system.
With ZPlane’s Elastique live stretch and pitch shift, adjust your loops and instruments to match the tempo or go experimental.
You can even integrate your favorite synth & effect apps with full AUv3 and IAA support.


▸ PRECISE SEQUENCING

The classic timeline based pattern & song editor gives all the modern sequencing features you‘d want to arrange complete tracks.
Adding to this foundation, the new flexible Scene Mode opens up opportunities for remixing and live performances, looping and arranging clips in new ways.

All the patterns, automations and sequencing tools are available right where you would expect.
Add audio tracks to the mix, stretch them, turn your arrangements into a complete masterpiece.

You can even play in sync with other software using Ableton Link.


▸ INSPIRATIONAL LIBRARY

The ever growing sound store will bring premium and exclusive content to your own library. The genius of our sound designers will enhance your productions instantly, whether you’re looking for a classic 808 bass or exploring new musical genres.


▸ FULL FLEDGED MIXER

Multi-channel recording & input/output routing is now a reality with the support of USB audio interfaces. Fine-tune your mix with the modern mixing board: every track, every pad has its own channel with unlimited effects and up to 8 sends.
Add new depths to your sound with our palette of effects (internal or external AUv3/IAA).


▸ EXPORT AND SHARE

Export your compositions and separated elements into single stems to share, re-use, re-work, re-master within a traditional studio setup


Read the full specs on http://intua.net !

▸ COMPATIBILITY
- Works with 32-bits and 64-bits iPads.
- Native iPad Pro support
- iOS 9.3+ required
- Best experience on newer models
- iPhone version coming soon

▸ Documentation
- Full documentation and tutorials available at http://support.intua.net
Hide.. Show more..

In-Apps

Beatlab
¥100
Modularism
¥100
Aquatronika
¥100
INTUA 808 Science
¥400
INTUA 909 Science
¥400
MSXII The Fly Life
¥1,000
Pure Basses & Drums Bundle
¥700
Starter Pack #1: July 2017
¥0
Starter Pack #2: August 2017
¥0
ThudRumble Gigantic Balls Bass
¥0

Screenshots

User Rating

4.51 out of 5

154 ratings in Japan

5 star
112
4 star
23
3 star
11
2 star
1
1 star
7

Ratings History

Reviews

Rất tốt

Kree68 on

Tôi rất thích DAW này, nó tốt về mọi thứ, nhưng việc import Midi file khá là khó khăn đối với tôi. Mỗi lần tôi thêm file midi khi chưa thêm nhạc cụ, DAW sẽ bị đơ và không làm gì được phải thoát ra vào lại. Hơn nữa, file midi chỉ hiện được một layer, mặc dù file đó có 2 layer. Tôi hy vọng có một bản cập nhật mới cho vấn đề này. Xin cảm ơn.

録音について

mropq on

how to use audio recorder please teach me.please

AUv3 について

太陽の塔の on

こちらの勘違いかも知れませんが、このアプリはGarageBand ではAUv3 には対応していないのでしょうか? Beatmaker2 の方はIAA のみの対応のようですが、Beatmaker3 の方は AUv3 と説明に書かれているのですが、今は対応をしていないということでしょうか? IAA には対応しているようなのですが… せっかく購入しましたし、大事にしていきたいので、その点をお教え頂きたいので、よろしく対応をお願い致します。

INTUA様

2482...Carol on

BeatMaker2を死ぬまで使いたい。3以降もそれはそれで進化した姿を見たいけど、2だけは別物として永遠に残してほしいです。BeatMaker2がなくなるとマジにiOSの音楽制作の面白みが半減するのでよろしくお願いします。特にマルチティンバー音源を使用してる人、これから使ってみたい人はBeatMaker2をぜひ研究してみるといいです。一見するとパッド推しなのでただのMPCと考える人が多いと思いますけど、とんでもないのです。BeatMaker2はMIDIシーケンサーとして優秀な上に、波形編集も得意だぞ!と、そういうポジションなわけです。マルチティンバー音源との相性ならマジでCubasisでも敵わない。唯一残念と言えばローランドのSOUND Canvas for iOSが販売終了してしまったことでしょうか。なぜって、あの伝説のローランドマルチSC-88Proのユニバーサルアプリ版を、iPhoneでも使いやすいBeatMaker2でシーケンス組んで、曲が出来上がったらSOUND Canvas for iOSのオーディオ出力をIAA (Inter-App Audio) ジェネレーターでBeatMaker2のオーディオトラックにループバック録音して (しかもBeatMaker2はパート毎に複数のトラックを作れるので、MIDIをキック、スネア、ハット、タム等々と分けておけばパラでオーディオ化出来る!)、そして仕上げる、が新規さんにはもう出来なくなっちゃったから。かーわいちょ! ただまあSampleTankがまだ現役ですし、iPadならKORG iM1 (とシーケンサーを積んだコルグアプリ全部) も素晴らしいマルチティンバー音源なので今からでも遅くないですけどね。ちなみにBeatMaker2とiM1を立ち上げて、BeatMaker2は16チャンネルのセッションをロード、iM1はマルチのプリセットをロード、それだけで作曲の準備は完了。特に接続する必要はなく、勝手にMIDIを送って、勝手にMIDIを受け取って鳴る関係なので、15秒でiOS最高峰サウンドが8音色並んだセッションが目の前に現れます。しかも軽い!(各アプリをバックグラウンド・オーディオをオンにしておかないと音鳴りません。まさかとは思うけど念のため笑)。あとは他にもマルチティンバー音源の有名どころと言えばbismark bs-16iとKQ Sampeiがあります。ともに国産で安く、特にKQさんはバグ報告すると直ちに対処してくださるので安心です。bs-16iもKQ SampeiもAudio Unitsに対応してますけど、Virtual MIDIで鳴らすとそのアプリの素のサウンドが鳴るのでより美しくて好みです。BeatMaker4の開発に活かしてほしくていろいろ書きました。あ、そうだ、BeatMaker3のライブラリー (全部24bitのwav。めっちゃ音良い) を結構購入しているので、もし4を出す時には簡単に持っていけるように考慮してほしいです。手移動はちょっと辛過ぎるので。 ーーー【BeatMaker2でのMIDI OUT (Virtual MIDI) 用トラックの作り方】トラック追加でキーボードかドラムマシンを選択、音色選択時に音色は選ばずEMPTY PRESETを選択。《MIDI》を開いてOUTPUTを音源アプリの任意のチャンネルに合わせる。INPUTは自分環境次第、自分はとりあえずNONEにしてあります。これを16コ作ってSAVEしておく。以降はSAVE ASでセッション名を変えていくだけ。 ーーー【IAAジェネレーターを使って各MIDIトラックをそれぞれオーディオトラックに録音する方法】トラック追加で《AUDIO APPS》を選択、音源アプリを選ぶ。念のため音源アプリのアイコンをタップして音源アプリに切り替わるか確認する。また同じく念のため《MIDI》を開いてIN/OUTともNONEにする。《AUDIO》も開いてINPUT BUSが音源アプリになっているか、MONITORとARM RECORDINGがオンになっているか確認する。問題なければ再生して音楽が鳴るか確かめる。不要なMIDIトラックをミュートして録音開始。録音後は音源アプリのアイコンを長押しして《DISCONNECT ONLY》を選択、IAA接続を解除する。次のパートを録音する為のトラックを追加する・・この繰り返し。 ーーーCubasisでも同様の考え方で同じことが出来ますが、CubasisはMIDIトラック毎に音源アプリを指定する必要があるので少々煩わしいです (楽器をNo Instrumentに変更した上で、RoutingのMIDI outputで音源アプリとチャンネルを設定する)。また当然BeatMaker3でもやれますが更にめんどくさいです。BeatMaker2の方がセッティングが簡潔、鍵盤も使いやすく、打ち込みやすく、シーケンスを組むのも手早くて、圧倒的に便利です。更にBeatMakerは録音した生データをそのまま外に持ち出せるのも特徴。【BeatMaker2でのデータの持ち出し方】左上のホームボタンをタップ、セッション名の隣の画面アイコンをタップ、《PASTEBOARD》→ 真ん中の《COPY BM2 TO iOS》でデータを選択して《LOAD》でペースト可能状態になります。※ 余談ですが、レート (BeatMaker2は録音は16bitのみ) を除けば、DAWによって録音品質が変わるということはありません。Pro Toolsで録ってもBeatMaker2で録ってもレートが同じなら同一の録音データになります。音質はA/Dの変換までで決まるもので、DAWは送られてきたデジタルデータを記録しているだけです (しかしDAWによって再生品質ーようは出音ーが異なるのでデータ自体が良くなるように勘違いしちゃう)。つまり言ってみればコピーしているだけなのでデータが変わっちゃうと逆に困ってしまう

INTUA迷走してるのかな

くんやつ on

INTUAのBeatMaker2は神アプリでiPadがMPCになったのにBeatMaker3あれはなんだ?機能詰め込みすぎて使いづらいしプリセット音は課金しないと入ってない。シンプルにBeatMaker2にAU挿せるだけで良かったんだよ。そしてプリセット音を現代的なドラムサウンド入れて8000円くらいで売れば神アプリだった。

起動しないのは困る

loる on

使い勝手は良いのだろうが、再起動、再インストールなど色々試してもなかなか起動しない。30分格闘してようやく起動、2〜4時間ほど使ったらフリーズ。そしてまた起動しないの流れ。困る。 iPad Pro A2228 容量も半分以上余裕あり。

troublemaker3

chappy350zg on

操作が複雑で音楽制作に専念できない。動作が不安定で頻繁に落ちる。子供の絵のようなデザイン。audiobus3で使うとヤバいことになる。というような理由でこれはダメです。

Still best music app in 2021

mintjp on

Love the app since it first release, thanks for the updates! Keep up the great work!

MIDI controller

氶平 on

MCU HUI MIDI learnなんでもいいのでフェーダーコントロールができるようにして欲しい。フェーダー、mute soloをフィジカルコントローラーでできるようになれば神アプリです。本当に惜しい。

Wanna Change Layout

はつすり on

Can I change Layout? Only sequential?

Store Rankings

Ranking History

App Ranking History not available yet

Category Rankings

App is not ranked yet

Keywords

Users may also like

Name
KORG Gadget 3
Make Music
Cubasis 3 DAW
音楽制作 と 録音アプリ
Drambo
Modular groovebox
AUM - Audio Mixer
Connect, route, mix, record!
AudiobusオーディオおよびMIDIスタジオ
オーディオ アプリ ミキサー + モジュラーDAW
LE01 | Bass 808 Synth + AUv3
SOLD OUT Limited Edition #1/10
AudioKit Digital D1 Synth
Amazing 80s/90s Synthesizer
DrumComputer - Synthetic Beats
Next Level Drum Synthesizer
Factory - Modular Synthesizer
Liquid Modular Synthesizer
iMPC Pro 2
Show More

Revenue and Downloads

Gain valuable insights into BeatMaker 3 performance with our analytics. Sign up now to access downloads, revenue, and more.

App Info

Category
Music
Publisher
INTUA
Languages
English
Recent version
3.0.16 (10 months ago )
Released on
Jul 15, 2017 (7 years ago )
Last updated
4 weeks ago