Elena
Ich habe die App nur wegen der Live-Vorschau gekauft und dann festgestellt, dass sie fehlt. Ich bin sehr enttäuscht ((
Description
-- NEW External Controllers --
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control supported on Pocket 4K only.
This is part of the new Pro feature set, which also includes Multi-Cam mode.
-- MULTI-CAM MODE --
Multi-Cam Mode is now part of the Pro feature set, and includes these fantastic features:
• Control up to 12 Blackmagic cameras at once
• Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
• You can choose to have changes made on one camera automatically update all the other cameras in its Control Group, or control everything straight from Bluetooth+
• Give your cameras Nicknames to quick, easy control
Multi-Cam gives you control over the following features synced across an entire Group:
• Start/Stop Recording
• White Balance + Tint
• Project frame rate (off-speed frame rates not supported)
• Shutter Angle/Speed
• ISO
• Overlays
• Slate
• Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
• Trigger stills capture
• Iris control
• Focus + Zoom (on supported lenses)
• Codec + Resolution
• Playback control
• You can also set ISO specifically, rather than by camera group
And of course, everyone has access to all of these amazing features:
• Follow Focus (limited support for EF Mount cameras). See below for more info
• Zoom Control on supported lenses
• Trigger Stills capture
• Record Start/Stop
• White Balance + Tint, including 5 helpful presets and Auto White Balance
• Audio Controls
• Trigger Autofocus (for supported electronic lenses with autofocus enabled on lens)
• Off-speed frame rates
• Aperture (for supported electronic lenses)
• Shutter Angle
• ISO
• Auto-Exposure Control
• Active Card
• Power On/Off
• Monitor Overlays
• Codec & Resolution
• Enter metadata in the Digital Slate (including location data from your iPhone or iPad if you give permission)
• Control Lock - locks critical controls while recording, preventing accidental settings changes during takes
-- Follow Focus --
You can now pull focus wirelessly right from your iPhone or iPad. There are some limitations outlined below.
• Currently only fully supports Pocket 4K, but as of v1.4 we now have limited support for EF mount cameras - Pocket 6K, Ursa Mini Pro G1 & G2
• The camera does not supply the app with any information on the lenses current focus distance, so the app will not update in real time if you pull focus manually on the lens
• Due to the nature of bluetooth, focus pulls may not be 100% smooth. It works well for nice slow pulls, but fast pulls my not feel entirely natural and organic. Unfortunately this is a limitation of the available technology.
• On EF mount cameras, we can only offset focus from its current position, with no broader knowledge of where the lens is in its focus range. This means that focus marks are not possible. In addition, focus pulls on EF mount cameras can be quite jerky depending on the lens in use.
-- Playback Control --
With Bluetooth+ you can control the playback of clips right from your iOS device. There are some notable limitations at this point. Currently you can:
• Start playing a clip, either forwards or backwards
• Navigate between clips, either forwards or backwards
For now, you will not be able to:
• Pause a clip that is already playing
• Change the speed of a clip that is already playing
• Control clip looping
-- Zoom Control --
Control the zoom level on supported lenses. For the most part, this will only work on MFT lenses with electronic zoom. We are currently unaware of EF lenses that support this feature
-- Slate-Only Mode --
As the name suggests, this feature locks the app into Slate-Only mode, without the ability to change critical camera settings or start/stop recording. This means you can let an assistant keep metadata up to date without the fear of interfering with important camera settings.
Hide..
Show more..
Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording.
Zoom and Focus control supported on Pocket 4K only.
This is part of the new Pro feature set, which also includes Multi-Cam mode.
-- MULTI-CAM MODE --
Multi-Cam Mode is now part of the Pro feature set, and includes these fantastic features:
• Control up to 12 Blackmagic cameras at once
• Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras
• You can choose to have changes made on one camera automatically update all the other cameras in its Control Group, or control everything straight from Bluetooth+
• Give your cameras Nicknames to quick, easy control
Multi-Cam gives you control over the following features synced across an entire Group:
• Start/Stop Recording
• White Balance + Tint
• Project frame rate (off-speed frame rates not supported)
• Shutter Angle/Speed
• ISO
• Overlays
• Slate
• Trigger Auto-focus
You can still control all other settings on a camera-by-camera basis, including:
• Trigger stills capture
• Iris control
• Focus + Zoom (on supported lenses)
• Codec + Resolution
• Playback control
• You can also set ISO specifically, rather than by camera group
And of course, everyone has access to all of these amazing features:
• Follow Focus (limited support for EF Mount cameras). See below for more info
• Zoom Control on supported lenses
• Trigger Stills capture
• Record Start/Stop
• White Balance + Tint, including 5 helpful presets and Auto White Balance
• Audio Controls
• Trigger Autofocus (for supported electronic lenses with autofocus enabled on lens)
• Off-speed frame rates
• Aperture (for supported electronic lenses)
• Shutter Angle
• ISO
• Auto-Exposure Control
• Active Card
• Power On/Off
• Monitor Overlays
• Codec & Resolution
• Enter metadata in the Digital Slate (including location data from your iPhone or iPad if you give permission)
• Control Lock - locks critical controls while recording, preventing accidental settings changes during takes
-- Follow Focus --
You can now pull focus wirelessly right from your iPhone or iPad. There are some limitations outlined below.
• Currently only fully supports Pocket 4K, but as of v1.4 we now have limited support for EF mount cameras - Pocket 6K, Ursa Mini Pro G1 & G2
• The camera does not supply the app with any information on the lenses current focus distance, so the app will not update in real time if you pull focus manually on the lens
• Due to the nature of bluetooth, focus pulls may not be 100% smooth. It works well for nice slow pulls, but fast pulls my not feel entirely natural and organic. Unfortunately this is a limitation of the available technology.
• On EF mount cameras, we can only offset focus from its current position, with no broader knowledge of where the lens is in its focus range. This means that focus marks are not possible. In addition, focus pulls on EF mount cameras can be quite jerky depending on the lens in use.
-- Playback Control --
With Bluetooth+ you can control the playback of clips right from your iOS device. There are some notable limitations at this point. Currently you can:
• Start playing a clip, either forwards or backwards
• Navigate between clips, either forwards or backwards
For now, you will not be able to:
• Pause a clip that is already playing
• Change the speed of a clip that is already playing
• Control clip looping
-- Zoom Control --
Control the zoom level on supported lenses. For the most part, this will only work on MFT lenses with electronic zoom. We are currently unaware of EF lenses that support this feature
-- Slate-Only Mode --
As the name suggests, this feature locks the app into Slate-Only mode, without the ability to change critical camera settings or start/stop recording. This means you can let an assistant keep metadata up to date without the fear of interfering with important camera settings.
In-Apps
- Pro
- 9,99 €
- Multi-Cam Control
- 9,99 €
Screenshots
User Rating
4.6 out of 5
169 ratings in Germany
5 star
135
4 star
18
3 star
6
2 star
3
1 star
7
Ratings History
Bluetooth Installs
Last 30 daysBluetooth Revenue
Last 30 daysBluetooth Reviews
Sehr gut außer, dass die Verbindung nicht standhält
Die Verbindung hält nicht Stand. Auch wenn man permanent die App geöffnet hält und die neueste Firmware auf der Kamera hat. Teuerer Spaß dafür, dass es einfach nicht funktioniert.
Timecode please
It is a fantastic app, overall. The one thing that is missing for me is Timecode sync.
Super
Finde die App super, lediglich vermisse ich seit einer Weile die Apple Watch Version. Liegt das an mir oder ist diese nicht mehr vorhanden?
Does everything I need
The app does basically everything I need from a remote control. Most importantly adjusting the focus since the latest update. The only thing I can’t figure out is how to write project/lens data?
Bluetooth issue since BMD 7.9 firmware update
All works just fine apart the start/stop recording function since BMD released their new firmware 7.9. I am able to start recording but not stop it. Can you plz fix that ?
Super App aber Zweck verfehlt …
Alles funktioniert wie es soll. Mein primärer Kaufgrund war die Funktionalität bei der ich über die Nucleus Handunit die Start/Stop Möglichkeit für die bmpcc6 habe. Weswegen ich mich für die Pro Version entschied. Starten kann ich die Aufnahmen, jedoch leider nicht stoppen. Dementsprechend kann ich die Aufnahme nur an der cam beenden, was den Zweck ja dann nicht erfüllt. Also für ein Crane oder jib welcher höher ist als man selbst, wird es dann schon problematisch die cam zu bedienen. Habe dem Hersteller versucht zu kontaktieren um auf das Problem aufmerksam zu machen. Leider ohne erfolg. Alle Devices sind auf dem neusten Softwarestand …
Verbindung
Muss mich ständig neu verbinden. Eher nervig.
Grandiose App
Habe mir kürzlich die Multicam Erweiterung innerhalb der App gekauft. Der Preis kam mir zunächst recht hoch vor, allerdings hat er sich jetzt schon ausgezahlt. Wenn die Kameras über die App verbunden sind, startet bei allen die Aufnahme, sobald bei einer Kamera die Aufnahme gestartet wird. Das ist so unglaublich bequem! Vielen Dank dafür. Ein Wunsch hierzu: Könntet ihr, sofern das technisch möglich ist, eine Einstellung einbauen, die den Timecode der Kameras synchronisiert? Das wäre großartig! Vielen Dank für diese App und die regelmäßigen Updates. Weiter so!
Bluetooth mit Blackmagic 6K Pro und Nucleus m
Das Verbinden mit dem Bluetooth und der Nucleus M funktioniert leider nicht und deshalb habe ich die App gekauft. Sehr schade. Wenn da kein Update kommt werde ich sie umtauschen.
Store Rankings
Ranking History
App Ranking History not available yet
Category Rankings
|
Chart
|
Category
|
Rank
|
|---|---|---|
|
Top Paid
|
|
14
|
|
Top Paid
|
|
21
|
|
Top Paid
|
|
27
|
|
Top Paid
|
|
29
|
|
Top Paid
|
|
42
|
Keywords
Bluetooth Competitors
| Name | Reviews | Recent release | |
|---|---|---|---|
Cadrage Director's Viewfinder
For Filmmakers & Photographers
|
16
|
1 day ago | |
RED_CONTROL
Take control of your RED®
|
2
|
2 weeks ago | |
Artemis Pro
The Pro Director's viewfinder
|
9
|
2 days ago | |
CameraKit: Camera Tools
Specs, storage calc, and more
|
12
|
2 weeks ago | |
Magic Cinema ViewFinder
BMD's Director's Viewfinder
|
1
|
2 years ago | |
Shot Lister
Film shot list & schedule tool
|
13
|
1 month ago | |
MixEffect (Trial & Pro Unlock)
ATEM Switcher Remote Control
|
6
|
2 months ago | |
Blackmagic BlueConnect
Blackmagic Camera Control
|
0
|
3 years ago | |
Blackmagic Camera Control
|
3
|
1 year ago | |
DaVinci Remote Monitor
|
3
|
3 months ago |
Bluetooth Revenue and Downloads
Gain valuable insights into Bluetooth performance with our analytics.
Sign up now to access downloads, revenue, and more.
Sign up now to access downloads, revenue, and more.
App Info
- Category
- Photo Video
- Publisher
- We Are Empire PTY
- Languages
- English
- Recent version
- 2.3.4 (3 months ago )
- Released on
- May 9, 2018 (6 years ago )
- Also available in
- United States, Germany, United Kingdom, China, Japan, Canada, France, Australia, Brazil, Italy, South Korea, Russia, Netherlands, Switzerland, Spain, Poland, Austria, Mexico, Sweden, Czechia, Taiwan, Romania, Belgium, India, Thailand, Greece, Malaysia, Hungary, Ukraine, Vietnam, Israel, Turkey, Colombia, New Zealand, Norway, Peru, Portugal, Chile, South Africa, Hong Kong, Egypt, Denmark, Finland, Ireland, Argentina, Dominican Republic, Indonesia, Saudi Arabia, Ecuador, Nigeria, Singapore, United Arab Emirates, Philippines, Kuwait, Belarus, Kazakhstan, Pakistan, Lebanon, Algeria, Azerbaijan
- Last updated
- 3 days ago